Mining Machinery Superfine Ball Mill , Stirred Ball Mill Manufacture

Mining Machinery Superfine Ball Mill , Stirred Ball Mill Manufacture    Product Description   Brief Introduction To MQG Series Superfine Ball Mill,Stirred Ball Mill MQX series super-fine ball mill is a kind of new type and high-efficient powder and superfine powder processing machinery which is used for grinding the medium and low-hard material that Moh's hardness is below 6, humidity is less than 8%, and non-flammable non-explosive minerals, such as calcite, cretaceous, caoline, limestone, bentonite, talcum, mica, magnesite, illite, pyrophyllite, vermiculite, sepiolite, Attapulgite clay, rectorite, diatomite, barite and so on.The classified powder could be adjusted between 300 and 2500mesh. with the classifier, the fineness will be better and could meet the requirements from different customers.   The MQG Series Superfine Ball Mill,Stirred Ball Mill produced by our  factory
  Characteristics of  MQG Series Superfine Ball Mill,Stirred Ball Mill Different design from traditional cement and mining processing, and in line with the requirements of Germany superfine material feeding and processing.
Optimize length-diameter ratio to avoid over-grinding and achieve the best effect of grinding.
Optimize aperture ratio and design of grate board, and improve the fineness by using lesser grinding medium.
Discharge the powder by grid smoothly,no need cooling for the cylindrical shell.
Optimize liner and the shape and the material for grinding medium, reduce the damage rate and improve the grinding efficiency according to Germany requirements.
For hard minerals, adopt Non-iron pollution design. Use alumina ceramics, quartz, silex and other special material for liner and grinding medium.
Adopt reasonable grinding medium as required, high feeding ratio and high efficiency.
Add grinding additives when grinding ultra-fine powder to improve grinding efficiency.
Optimize the matching of the energy consumption and grinding drive, reduce energy consumption.
Formed a closed system with classifier, negative pressure conveying and less dust.   the structure of the ball mill  MQG Series Superfine Ball Mill,Stirred Ball Mill     Working principle of  MQX Series Superfine Ball Mill ,Stirred Ball Mill
After washed and dried(humidity less than 1%), the raw mineral was crushed to less than 2mm by jaw crusher and hammer crusher, enter the hopper by bucket elevator, then to superfine ball mill through belt conveying system. The ball mill crush, shatter and grind the stone by the rotation energy, and then the powder enter the classifier for the first classification, most of the big particle was separated, and the fine powder enters turbine classification level area for second classification. After twice classifications, qualified fine powder was collected by powder collectors, while the coarse powder return to ball mill for secondary crushing and grinding.   the gear of the ball mill   Discharge port of grinding mill    the ball mill liner   Ball Mill Grinding steel ball:   the transmission part    Technical Parameter of Grinding Mill 

Model	Rotation speed (r/min)	Grinding media loading (t)	Feed size (mm)	Discharge size(mm)	Capacity (t/h)	Power (KW)	Weight (T)
Φ900×1800	38	1.5	≤20	0.075-0.89	0.65-2	18.5	3.6
Φ900×3000	38	2.51	≤20	0.075-0.89	1.1-3.5	22	4.6
Φ1200×2400	32	3.8	≤25	0.075-0.6	1.5-4.8	30-45	12.5
Φ1200×3000	32	5	≤25	0.074-0.4	1.6-5	30-45	12.8
Φ1200×4500	32	7	≤25	0.074-0.4	1.6-5.5	55	13.8
Φ1500×3000	27	8	≤25	0.074-0.4	2-5.8	75-90	17
Φ1500×4500	27	14	≤25	0.074-0.4	3-6.5	90-110	21
Φ1500×5700	27	15	≤25	0.074-0.4	3.5-8	110-132	24.7
Φ1830×3000	24	11	≤25	0.074-0.4	4-10	132-180	28
Φ1830×6400	24	23	≤25	0.074-0.4	6.5-15	210	34
Φ1830×7000	24	25	≤25	0.074-0.4	7.5-17	210-245	36
Φ2200×5500	21	30	≤25	0.074-0.4	10-22	370	48
Φ2200×6500	21	31	≤25	0.074-0.4	14-26	380	50
Φ2200×7500	21	33	≤25	0.074-0.4	15-29	475	56
Φ2400×7000	21	39	≤25	0.074-0.4	16-33	475	69
Φ2400×11000	21	51.5	≤25	0.04-0.08	16-35	630	99
Φ2700×3600	21	39	≤25	0.074-0.4	16-29	475	74
Φ2700×4500	21	43.5	≤25	0.074-0.4	20-35	500	80
Φ3200×4500	18	65	≤25	0.074-0.4	25-40	800	137

   the locai use of the ball mill Our Services 1>.Pre-sale services: enthusiasm We provide you with the prophase plan, process flow design and manufacturer equipment according to your special demand. 2>.Sale services: servant Send technicians to the jobsite for guiding the installation and adjustment, training operators and finishing the check and accept together with you. 3>.After-sale services: faithfulness To establish long term friendship, we will regularly pay return visit to customers. Supplying technique, building design, instruction, installation and debugging for free. 4>.We provide one-year warranty to make sure your machine runs consistently. We always offering lifelong services and provide spare parts for a long term. the clients of the factory Company Information Support & service from Zhengzhou Jinma Mining Machinery Co., Ltd 1. Jinma provide the design, process diagram and foundation drawings according to clients' request.
2. Clients are welcome to inspect the equipment when the equipment are ready to delivery. 3. Equipment will be delivered with English Manuals and technical drawings 4. Engineers available to service machinery overseas, to make the layout design, foundations, guide the installation, commissioning run test, training workers, etc. 5.The equipment ordered from jinma will be guaranteed within 2 years since the day of purchasing if the problem is due to the equipment’s quality. If there is big quality problem with the equipment, the seller will discuss with the buyer and offer proposals to solve the problems within 72 hours since the notice from buyer. 6.Offer spares for the equipment within 10 years   the certificate of our factory  Packaging & Shipping Export Country Mexico, Australia, Ghana, Qatar, Tajikistan, Azerbaijan, Vietnam, Kazakhstan, Mongolia, Ecuador, Iran, Pakistan, the Middle East and other countries and areas. the delivery of the ball mill FAQ   1.How long is the delivery time of your equipment? The delivery time is within 30 working days. But when the project is very big and the customers have special requirement on the equipment, the delivery could be extended. 2.How long is the equipment warranty period? Our equipment warranty period is 1 year. Wearing parts and problem coursed by worker’s wrong operation are not included. 3.Can you provide wearing parts? We have two casting factories that specialize in produce wearing parts for our clients. If your equipment are not manufactured by our company, please provide us the wearing parts drawing. 4.Can you give me a solution and quotation? Of course, to provide accurate solution and quotation, please give us background information, including, raw material, the capacity, max. input size, the output size, the usage of final products, etc.    Notes:Our company  with the goal of  "The excellent, the better" and "Satisfaction from customers" as the eternal pursuit, we sincerely welcome clients from all over the world to come for a visit, and establish long term win -win cooperation . Believe us and choose us.We will give you the most suitable price with full specification.   If you want to know more about the product ,please contact me at ant time  ,i am cherry fan

Company	Zhengzhou Jinma Mining Machinery Co., Ltd
Name	Cherry Fan
Tel	+86-371-67511065
Fax	+86-371-67512579
Mobile	+86-18239673197
Skype	cherry74120
Web	www.zzjmjx.c