Mini Suction Feed High Pressure Spray Gun , air compressor

Specification:

Standard Diameter Nozzle:	1.4mm
Nozzle Size:	1.4--2.0mm
Rated Air Pressure:	3.0Bar/45Psi
Max.Pattern Width of Fan Shaped:	240mm
Capacity of Paint Container:	1000ml
Type of Feed:	Suction

Feature:

Type of Feed: Suction
Standard Nozzle: Φ1.4mm
Optional Nozzle: Φ1.4/1.7/1.8/2.0mm
Operating Pressure: 3.5-5.0bar
Peattern width: 200-250mm
Air Consumption: 7.0-12.0cfm
Paint Capacity: 1000 ml
Color Box:
20PCS(68x42x34cm), 12/10KGS

Mainly used for medium adhesive painting of middle or low adhesive surfaces.

ST-4001A ​ Exploded Drawing :

PART NO.	DESCRIPTION	PART NO.	DESCRIPTION
1	Air Cap Set	24	Air Hose Joint
2	Nozzle	25*	Copper Pin
9	Needle Valve Spring	26	Cup
10	Copper Gasket	27	Air Adjusting Valve Set
11	Fluid Needle	29*	Baffle
12	Spread Adj. Valve Set	30*	Nut
13	Trigger Pin	31*	Screw
15	0-ring	32	Filter
16	Needle Valve Guide	33	Air Inlet
17	Screw	34*	Cup Gasket
18	Fluid Joint	38*	Spare Parts
19	Fluid Adjusting Screw	39*	Lid Assy. Set
20	Trigger	41*	Air Valve Set
22*	0-ring	42*	Material Tube Assembly
21	Air Orienting Ring	43*	Cup Top Assemby
23*	Lever	44*	Yoke Assembly

Safety Warnings and Precautions

WARNING: When using tool, basic safety precautions should always be followed to

reduce the risk of personal injury and damage to equipment.Read all instructions before using this tool!

1. Keep work area clean. Cluttered areas invite injuries.

2. Observe work area conditions. Do not use machines or power tools in damp or wet locations. Don’t expose to rain. Keep work area well lit. Do not use air tools in the presence of flammable gases or liquids.

3. Keep children away. Children must never be allowed in the work area. Do not let them handle machines, tools, extension cords, or air hoses.

4. Store idle equipment. When not in use, tools must be stored in a dry location to inhibit rust. Always lock up tools and keep out of reach of children.

5. Use the right tool for the job. Do not attempt to force a small tool or attachment to do the work of a larger industrial tool. There are certain applications forwhich this tool was designed. It will do the job better and more safely at the rate for which it was intended. Do not modify this tool and do not use this tool for a purpose for which it was not intended.