Mini Ksd301 Snap-action Bimetal Disc Thermostat For Water Dispenser

Mini KSD301 Snap-action Bimetal Disc Thermostat For Water Dispenser

 

 

Key Specification

 

Detailed Product Description
1.Auto/ manual 10A/250V
2.Bakelite body or ceramic body
3.Vertical or horizontal terminal
 
Detailed Product Description
Applications of KSD301 Thermostat
1. Water dispenser, Electric heater, Sandwich toasters, Dishwashers, Dryers, Disinfection cabinet, Microwave ovens, Electric coffee pot, Electric caldron, Refrigerator, Air conditioning gluing machine
2. Office equipment
3. The seat heaters
                                                                                  
Advantages of KSD301 Thermostat

1. Stable performance
2. High accuracy
3. Mini-size, light
4. High reliability and long lifespan
5. Little radio interference
6.Less flashover
 
Special features of KSD301 Thermostat
Temperature sensing components consist of bimetallic strip. When the temperature reached the action temperature range, it will jump quickly and the movable disc disconnects. When the temperature declines to a fixed temperature point, the contact point cannot reset until reconnecting the circuit by pushing the reset button. And then the contact points recover , reaching a purpose of connecting or disconnecting the circuit and restarting the circuit by manual reset. (Kindly reminder: 1.This type of manual reset thermostat can reset when the temperature declines 20 ℃ after snap action by pressing the reset button. And 4~6 N will be advisable, please don’t use too much strength. 2. To ensure the normal function, the distance between the reset button and the close cover should not be less than 20.4mm. )
 
 
 
Applications:
 

• Automatic drop coffee machine
• Water heater
• Toaster furnace
• Dish washer
• Boiler
• Cooker
• Drier
• Electric heating appliance
• Washing machines
• Office supplies

 
 
Specification
 

Rated voltage and current	16A/125VAC,10A/250VAC   50HZ/60HZ
Cycles life	100, 000 cycles
Terminal	6.35*0.8,  4.8*0.5.
Available Calibration Ranges	40℃ up to 180℃,tolerance ±5℃(insulation material PPS)
Available Calibration Ranges	40℃ up t o 220℃,tolerance ±5℃(insulation material 95 ceramics )
Standard Differential	up to 40° C below the min. switching temperature limit lowest limit 30° C. Other values on request
Pull strength	≥80N, no slip off
Dielectric Strength Terminal to Cap	2000 V eff, 50 HZ
Contact resistance	≤100 mW
Min. Rate of Temp. Rise	0,5° C /min
Ambient Temperature Limits	0° up to 200°

 
 
Competitive Advantage:
 

Compliant with the RoHS Directive

With TUV and CCC safety certification marks

Tracking Resistance of Base Material   PTI ≥ 250 V