Mingsen HDI6000 IC card embedding equipment

  Mingsen HDI6000 IC card embedding equipment    Function : >This machine is designed to implant/embed the chip modules from the chip belt into the chip cavity in the card base .It can also firstly joint the chip module with the card base's built-in RF antenna, and then implant the jointed chip module into the chip cavity in the card base .   >This machine includes multiple functions:chip tape loading ,chip implanting , chip implanting inspection, chip hot pressing 2-4times,chip cold pressing 1 time,chip ATR inspection,chip collection.   >This machine by our patented chip implanting technology,implants the chip into the card base at high speed and accuracy. The whole operating system is reliable to protect the chip without damage.   Feature: This machine is controlled by PC and servo motor; Conveyor belt system is driven by the clutch-brake motor. Cards are sent automatically by conveyor and has high accuracy of positioning. The direction of milled and un-milled cards will be inspected automatically. Different size of embedding mould is easy to be replaced. The pneumatic clip with the function of automatic adjustment will put the card on the desired place. The optical-fiber sensor can test the IC card integrity before embedded; IC card will be automatically positioned to ensure the high accuracy of embedding; Embedded cards is up to ISO7816 standard and the machine equipped with device for testing the accuracy of the embedded chip; Test the modular ATR before collection cards.   Technical parameter: Productivity: 6000 cards/hour; Card size: 86*54mm Card thickness: 0.76-1mm; Power: 2KW; Power supply: 220VAC 50-60HZ; Temperature: 0-40 degree centigrade; Air pressure: 0.5-0.8Mpa; Humidity: 15-90% Dimension: 1800*700*1600mm.