manufacturer PVC insulated low voltage FTP cat6 cable for network 305m Products Detail:
4 pair utp cat6 network cables 305m Over View Application structured cabling, CCTV system , Alarm system , Telecom project etc. Compared with cat5 and cat5e,CAT6 CABLE features more stringent specifications for crosstalk and system noise. Can be used for voice, integrated service data network (ISDN), ATM155Mbps,100 Mbps TPDDI , fast ethernet and gigabit ethernet. Long transmission distance, small transmission loss, wear resistance, resistance to pressure. Products Structure
Comparison of UTP/FTP/SFTP
Price | High | SFTP>>FTP>>UTP | Low |
Flexible | Flexible | UTP>>FTP>>SFTP | Inflexible |
Didturbance resistant | good | SFTP>>FTP>>UTP | Bad |
Comparision of Cat5e&Cat6
| Cat5e | Cat6 |
Maximum length | 100m | 100m |
Bandwidth | 100Mhz | 250Mhz |
Disturbance resistant | Normal | Good |
Suitable for | 100BASE-TX (Fast Ethernet) | 1000BASE-T (Gigabit Ethernet) |
Diamater | 5.2mm | 5.8mm |
Theoretical download | 12.8 M/s | 128 M/s |
About Cat5e system 1000Base-T is the standard applied by the Cat5e system during the Gigabit Ethernet transaction, which could run properly on the Cat5 Twist-Pair that meets the standard of ANSI/TIA/EIA-568A(1995).1000Base-T would finish the data transaction by applying to 4 pairs of Cat5 Twist-Pair and each of them is responsible for a 250Mbps data flow. However, as the designed bandwidth is only 100MHz for the Cat5 & Cat5e Twist-Pair, it must satisfy some special requirements to achieve the two-way transmission within the 1000Mbps network. About Cat6 system 1000BASE-Tx is the working style for Cat6 system. Similarly, 1000Base-Tx works on the basis of 4 pairs of Twist-Pair; but two of them are for sending while the other two are for receiving(similar to the 100Base-TX, who sends and receives data respectively by two Twist-Pair). Each pair of cables doesn’t conduct a two-way transmission themselves; therefore the crosstalk between cables decreases greatly, along with a relatively simple coding way. Such kind of technology has a lower requirement on the network interface. It doesn’t require quite a complicated circuit design thus the cost on network interface is decreased. Whereas, along with the efficiency decrease of the used cables (two for sending and two for receiving), the bandwidth is required to be over 100mhz so as to achieve a 1000mbps transmission speed;i.e. such kind of network is not supported in the Cat5&Cat5e system but will only be supported by the Cat6 system. OurhotsaleCAT6products:
Thank you for your time!