led driver 32V 7-9*1W 300mA CE Indoor LED Driver Plastic Case

    Product Description   led driver 32V 7-9*1W 300mA CE Indoor LED Driver Plastic Case Technical Parameters:
  Output:

Model:	CC10W-0300-32V
DC Voltage:	32V
Rated Current:	300mA
Current Range:	285~315mA
Rated Power:	7-9*1W
Ripple & Noise:	3000mVp-p
Voltage ADJ Range:	25~32V
Current Tolerance:	±5%
Start Time:	1s/115VAC , 0.5s/220VAC

    Input: 

Voltage Range:	90~264VAC
Frequency Range:	47~63Hz
Efficiency:	85%
AC Current:	0.128A/90VAC 0.049A/220VAC
Inrush Current:	Cold Start 20A
Power Factor:	>0.9(200~240VAC)

    Protection:

Overload:	Above 105% rated output power
	Protection type: Hiccup mode, recovers automatically after fault condition is remover
Over Voltage:	Protection type: Shut down o/p voltage, re-power on to recover

    Environment:

Working Temp:	-20~+60°C
Working Humidity:	20~90%RH
Storage Temp Humidity:	-40~+85°C 10~95%RH
Vibration:	10~500Hz, 2G 10min./ 1cycle 10~500Hz, 2G 10min/1cycle

       Other:

MTBF:	100khrs min
Dimension:	52 x 28 x 22mm (LxWxH)
Weight:	0.06kg

      Certificatie:

CE EMC:	EN55022:2010 EN61000-3-2:2006+AL:2009 EN61000-3-3:2008 EN55024:2010 EN55015:2006+AL:2007+2009 EN61547:2009
CE LVD:	EN61347-1:2008+A1:2001 EN61347-2-13:2006 EN60950-1:2006+A11:2009+A1:2010+A12:2001
ROHS:	EPA3050B:1996 EN1122B:2001 EPA3052:1996 EPA 3060A:1996 EPA7196A:1992 EPA3540C:1996 EPA8270D:2007 IEC62321:2008

      1. AC input 90~264V 2. High efficiency, high reliability, built-in PFC 3. Protection: Over load/Short circuit/Over Voltage 4. IP 66 degree of protection 5. 100% full load aging test 6. Apply with lighting device safty 7. Three years warrenty 8. Passed EMC EN55015 standard test             Company Information      Foshan Ledriver Optoelectronics Technology Co.Ltd, It is a new high-tech enterprise which specializes in research, design, manufacture and after-sales service of LED drive power matching LED lamps. 
   There are many high requirements to match the voltage of LED drive power. Like our hearts, the quality of drive power is the key of LED's longevity and high efficiency. LED is a sensitive semiconductor device with the characteristic of negative temperature. Therefore, in the application LED needs to be stabilized and protected, resulting in a concept of drive. LED devices require a lot about the drive power. Because the LED drive power is low voltage with 2-3v, it needs complex convert circuit. Different kinds of LED lights need different power adapters. The founder of company is a senior engineer who has rich experience in designing LED lights and solar lights which is strict in the quality of the products. The drive circuit he designed has many advantages, such as longer life, lower heating, and nice look. 
    The company aims at high quality and mutual benefits. And it follows the operating guidelines of equality, Integrity, cooperation, development, bringing you the most satisfying products.