1 / 1
Model No. : | DCH |
---|
Product description
Main part detail of machine(rotary or reciprocating) | ||
No | part | Detail |
1 | Work size | 1600mm1800mm2200mm2400mm2600mm2800mm3000mm 3200mm3400mm |
2 | Spraying Guns | 2, 4, 6, 8, 10, 12, 14, 16(single road)Germany A10 or Italy |
3 | Spraying Guns | 4, 8, 12, 16, 20, 24, 28, 32(double road) Germany A10 or Italy |
4 | Pump | Italy |
5 | Electromagnetic | Germany |
6 | Computer | newest high-density computer |
7 | Spraying Room | 1.5 mm stainless steal inside of room and iron outside of room |
8 | Water Running Board of Spraying Room | 1.5 mm stainless steal, prevent leaking |
9 | Clean inside of Spraying Room | Water cycle without a break |
10 | Turntable | Controlled by frequency conversion and connected by computer seamless technology. |
11 | Dedusting | Single environmental Dedusting group under 240 cm, and double environmental Dedusting group above 260 cm |
12 | Ovens | 8 meters for 4 ovens |
13 | Insulation Board | High-class compressed insulation board sealed by machine, increase heating efficiency 5-10% |
14 | Thermostat | Electronic-style automatic thermostat |
15 | Heating | Steam/infrared/oil |
16 | Transmission Line | Front lines and back lines are separated, and its densty is 2 cm. |
17 | Washing Line | High-class washing line group. |
Machinery characters | ||
No | Part | Description |
SPRAYING HOUSE DETAIL |
Turntable power | 0.75-1.1kw |
Speed Inverter control | 0-30times/min | |
Diameter of turntable | 800mm | |
Slip ring number | 14 round | |
Electric valve | Three way | |
Electric valve pressure | 24v DC | |
Sealing method and material | Teflon | |
Compressor air | 4cbm/min | |
Pressure request | 8kg/cm2 | |
Pump pressure request | 1-4kg/cm2 | |
Distance between gun and wire | 100-150mm | |
Distance between gun beside and spraying house | > 70cm | |
Distance between gun left or right and spraying house | > 25 | |
Spraying house height | 210-224cm | |
House stainless steel thickness | 1.5mm+/-0.1-0.2 | |
House support thickness | 3mm+/-0.1-0.3 | |
House wall thickness | 1.5mm+/-0.1-0.2 | |
Dedusting unit | dedusting house size | 1600x1000x2030mm |
Dedusting power | 4-7.5kw, 0.7-0.75 | |
Windy control | Filter and board | |
Spraying number and diameter | 30/group, diameter 5mm | |
Water request for dedusting | 0.3-0.5 cmb | |
Water change time | Every 2 weeks | |
Water pump and lift | 40-60t/h; 0.9m | |
Diameter of dedusting pipe | 2" | |
Diameter of joined dedusting pipe | 2" | |
Dedusting request | Do same time with water change | |
Feed table Length of pipe | 1.8-2.4m | |
Conveyor | Photo trace distance | > 40cm |
Diameter of roller | 219mm | |
Bearing model | Ucp210=214 | |
Single wire density | 20mm | |
Inverter motor power | 4kw | |
Gear box | cycloidal needle wheel type motor | |
Speed of gear box | 0-20m/min | |
Washing unit | Washing unit power | 0.55kw |
Washing unit rotary speed | 80runs/min | |
Washing diameter of roller | 170mm | |
Washing tank water change time | Every day more than one time | |
Distance between oven and ground | 1800mm | |
Oven detail | Height of oven house | 1200mm |
Distance between line and oven | 900-950mm | |
Distance with Fan over and line | 150-170mm | |
Oven power | 0.75kw, 8000m3/h | |
Oven temperature | 80-100 degree | |
Humidity fun | 1-2 pc | |
Fan power | 0.55kw | |
Radiator detail | Seamless, thickness> 2.5mm, diameter 25-30mm, 9 pcs, length 190cm | |
Area of radiator | 8-9m2 | |
Oven control system | Sensor, controller, electric valve, pump | |
Surface deal with | Pressure > kg, hot zinc | |
condensate water | Recycling deal with | |
Radiator sealing | asbestos | |
Over size more than oven | 300mm | |
Cooling fan power | 0.5kw/pc | |
Others | Group for wire | 3-4 group |
Total power | 18-22kw | |
Feed table length | 180-240cm | |
Out table length | 200-240cm | |
Washing line length | 250-260cm | |
Spraying house length | 360-560cm | |
Spraying house width | 300-470cm | |
Total length | 19.9-28m |
Computer Technology Characteristic | ||
No | part | Detail |
1 | Gun adjustable range | > 5cm |
2 | Expanding gun parameters | > 5cm |
3 | Less gun parameters | > 5cm |
4 | High - precision, photoelectric cell | 2.5cm |
5 | High precision spray tracking | |
6 | Leather graphical display | |
7 | Tone gun, spraying a key operation | |
8 | Spray skin area of the cumulative calculation | |
9 | Point spray feature can emit a variety of effects of pattern | |
10 | Spraying direction choose for go or back | |
11 | Single or double guns choose | |
12 | Time set for spraying when point to point | |
13 | Auto washing gun | |
14 | The edge expansion of leather | |
15 | Gun auto correction | |
16 | Auto test and check | |
17 | Round and speed display | |
18 | Auto specification set | |
19 | Auto raster set | |
20 | Turntable diameter set |
Send your inquiry to this supplier