Isostatic Graphite Rod and Block for Energy and Photovoltaic Industry

Specifications Isostatic Graphite Rod and Block for Energy and Photovoltaic Industry

1.High density

2.High mechanical strength

Isostatic Graphite Rod and Block for Energy and Photovoltaic Industry Our Graphite Block & Rod are widely used in various industry zones for different application purposes Properties:

Part number	Bulk Density	Electric Resistivity	Compressive Strength	Flexural Strength	Shore Hardness	Ash Content/purification	Average Granularith	Coefficient of Thermal Expansion	Young's Modulus
	>=g/cm³	μΩ•m	Mpa	Mpa		ppm	μm	×10-6/°C	Gpa
G-CDI-CT-0601	1.85	11~13	90	40	55	500/50	25	4.8	11.5
G-CDI-CT-0602	1.80	11~13	86	40	50	500/50	25	4.5	10.0
G-CDI-CT-0605	1.80	<=15	80	37	50	700/50	25	4.5	11.5
G-CDI-CY-0701	1.81	11~12	70	40	50~60	500	25	3.9	11.0
G-CDI-CY-0704	1.80	17	88	45	55	1000	12	4.2	11.5
G-CDI-CT-0606	1.85	<= 15	90	40	55	700/50	25	4.8	11.5
G-CDI-CT-0609	1.80	<= 15	86	40	50	700/50	25	4.5	11.5
G-EDM-CT-0603	1.80	<= 15	86	42	55	1000	25	4.5	11.5
G-EDM-CT-0604	1.85	<= 15	90	45	60	1000	21	5.0	12.0
G-EDM-CT-0605	1.80	<= 15	90	45	60	1000	15	5.0	11.5
G-EDM-CT-0606	1.80	<= 15	90	45	65	1000	7	4.8	11.5
G-EDM-CY-01	1.80	10~12	75	35	45	500	25	3.8	10.0
G-EDM-CY-02	1.81	10~12	85	40	50	500	22	4.2	11.0
G-EDM-CY-03	1.82	10~12	90	45	55	500	20	4.5	11.5
G-EDM-CY-04	1.85	11~13	100	55	55	500	18	4.2	11.5
G-EDM-KY-01	1.85	12~14	110	45	/	1000/50	8	/	/
G-EDM-KY-02	1.85	13~15	110~120	55	/	1000/50	6	/	/

    Isostatic Graphite Rod and Block for Energy and Photovoltaic Industry Applications : Molds in continuous casting systems for making shaped steel, cast iron, copper; 
Sintering molds for cemented carbides, diamond tools and electronic components; 
Molds for making shaped glass;  Crucibles for melting precious metals or alloys; 
Electrodes for EDM;     
Heating elements, heat shields, crucibles, boats in furnaces for pulling monocrystalline silicon or optical fibers; 
Anodes for production of manganese dioxide, metallic magnesium and rare metals; 
And so on.    Features: Fine grain. 
Homogeneous structure. 
Isotropic properties. 
High density and high mechanical strength. 
High thermal and chemical resistance. 
High resistance to thermal shock. 
Proper electrical conductivity. 
Higher oxidation resistance. 
Lower ash content . Typical sizes: 
φ500*450,φ570*550,φ635*650,φ650*650,φ680*660,φ700*660,φ760*720 400x400x500,500x500x600,1000x500x300,1300x600x400,1000x600x300 * Special sizes also available on request.