ISO Certification Continuous Process Waste Tyre Recycling Machine & Tire Shredder Waste Tyre Recycling Machine

Specifications Waste Tire Recycling Rubber Powder Machine&Used Waste tire Recycling Machine

The whole line work smoothfully

 ISO Certification Waste Tire Recycling Rubber Powder Machine Details about these machines Process flow:    waste tyre--cutting loop mouth--cutting strip--cutting dice crushing filtering--magnetic separating filtering--finished products Processing method:      Physic mechanical crushing method at normal temperature of waste tyre:nochemical raw material is required,no waste gas,washte water and soot are discharged, and the cooling water of the equipment is reused,no emission,equipment noise is within the range specified by the country(GB20055-2006),fineness of rubber powder produced by it is adjustable(10 meshes to 30 meshes),take waste tyre as example,the process is as follows:breaking down,crushing,filtering,magnetic separating,grin-ding,then the finished products are produced. 1.Frist Step: Tyre bead ring cutting off machine
This machine mian to cut the inner dimater of the tyre, and cut the side of the tyre to the next step of segmentation.  

Motor power	Working range	Working quatity	Size of figure	weight of equipment
2.2kw	750-1200tyre	25-30strips/h	1150*850*1200	0.5ton

       2.Tyre bead steel ring seperator
Tyre bead steel ring seperator by double cell extrusion, and the two grooved roller speed differential will ring in the mouth than the wire separation, maintaining good physicalproperties of steel wire, rubber can then use it to avoid environmental pollution.   

Motor power	Working range	Size of discharge	Size of equipment	Weight of euipment
15kw	1 mouth of tyre need1 miutumines	1.2*500*20	1500*1100*1200	1.8ton

         3.tyre strips cutting machine
Strips cutting machine can cut cycle machine to remove the wire tire sidewall cut into strips, and the width of the adjustable section. Two circular knives for specialmaterials, hard and durable, can be used repeatedly grinding for no more than 1200 steel tires.  

Motor power	Working range	Working diamater	Size of discharge	Size of equipment	Weight of equipment
5.5kw	10strips/h	Less 1200	35-55	1230*650*1580	0.8ton

     4.tyre rim cutting machine
Cutting machine can cut a tire strip, cut block, tool for the alloy cutting tools, nearly 9-11 tons per day, cutting tools are not sharp and repeated grinding  

Motor power	Working quitaty	Size of discharge	Size of equipment	Weight of equipment
7.5kw	0.8-1.5t/h	35*35*35	780*550*1210	0.6ton

        5.Break mills & crusher mill & Banbury machine                 

Model	XK-360	XK-400	XK-450	XK-560	XK-660	XK-710
Diameter of roller(mm)	360	400	450	560/510	660	710
Length of roller (mm)	900	1000	1200	1530	2130	2200
Linear speed of front roller(m/min)	16.25	18.65	24.26	27.72	28.6	32.53
Friction ratio of roller(front/rear) m/min	1:1.25	1:1.27	1:1.27	1:1.2	1:1.24	1:1.09
Max gap of roller(mm)	10	10	15	15	15	15
Capacity per. batch(kg)	20~25	18-35	25-50	35~50	165	200
Motor power(kw)	30	37	55	90	245	280
L*W*H(mm)	3780×1850 ×1750	4350×1850 ×1785	5200×2380 ×1840	5845×2284 ×1978	7465×3662 ×2080

       Shaking Sieve Conveyor Belt        

Host	Equipment	Quantity	Equipment Description and Function
	Rubber crusher	1	The waste tire rubber and miscellaneous plastic pieces were breaking milling cycle
Equipment	Ring cutter	1	Will tire side and tire top joint use a knife to slice; Make the side of the tire and tire top complete separation
	Strips cutter	1	Will be cut into strips the tire sidewall, tire I circle reserved
	Rim cutter	1	The tires will be cut into strips cut into 3.5 cm square block
	Big Shaker	1	The powder for the first time separation (8 - 10 mesh)
	Small shaker	1	The powder for the second time separation (20-30mesh)
	Large conveyor	1	It is used for transportation does not meet the requirements of mesh powder to return the host to continue breaking
	Magnetic separation unit	1	The powder was extracted in the separation of the metal wire
	Fiber separator.	1	The powder was extracted in the wool fiber
	Steel separator	1	will tire of crude steel mouth ring and rubber parts completely separated
Remarks			Above unit is in the process of tires used to crush the machine

  Applicaton Application Depend on your capacity and your requirment, We will match fitable machine to you and quote you best price.   If you are interested in our products,Please contact me.