Product description
Quick detail:
- Simple installation, small contact resistance and low temperature rise of the clamp
- The applicable voltage is 10kV, 1kV or less than 1kV
- Piercing connector, simple installation, need not strip the cable coat
- Moment nut, piercing pressure is constant,keep good electric connection and make no damage to lead
- Self-seam frame, waterproof and anti-corrosion,extend the using life of insulated lead and connector
- Adopted special connecting tablet,apply to joint of Cu (Al) and Cu (Al) or Cu and Al
- Small electric connection resistance, impulse current can be up to 15kA
- Special insulated case body, resistance to illumination and environmental aging, the insulation strength can up to 6kV
- Aac surface design, apply to connection with the same (different) diameter, wind connection scope (0.75-400mm²)
Description:
- A broad usage in 1kV or 10kV overhead lines, branch connections without wire stripping
- Branch connections for main cable, building distribution, streetlights systems
- The insulation material of the connector made of weather resistant glass fiber reinforced polymer, contact teeth made of tinned brass or copper or aluminum, bolt made of dacromet steel, and the special contact blade guaranteed the best contact surface
Applications:
- The connection of main circuitries, the connection of main circuitry and outdoor circuitry, the connections of main circuitry and electric appliance and street lamps
- Applicable to T connection of structural distribution system,the connection of airy low voltage insulated cable, or indoor electric wire,distribution system of street lamp
- Can be installed with online line and can work without power
Specifications:
- Purpose of insulation piercing connectors (IPC) is to connect main and one (PC13), two (PC24) tap conductor's of section, how is written on IPC body
- Type without letter B serves to connect isolated conductors,with letter B bare conductors
Simple installation, small contact resistance and low temperature rise of the clamp
The applicable voltage is 10kV, 1kV or less than 1kV
Piercing connector, simple installation, need not strip the cable coat
Moment nut, piercing pressure is constant,keep good electric connection and make no damage to lead
Self-seam frame, waterproof and anti-corrosion,extend the using life of insulated lead and connector
Adopted special connecting tablet,apply to joint of Cu (Al) and Cu (Al) or Cu and Al
Small electric connection resistance, impulse current can be up to 15kA
Special insulated case body, resistance to illumination and environmental aging, the insulation strength can up to 6kV
Aac surface design, apply to connection with the same (different) diameter, wind connection scope (0.75-400mm²)
A broad usage in 1kV or 10kV overhead lines, branch connections without wire stripping
Branch connections for main cable, building distribution, streetlights systems
The insulation material of the connector made of weather resistant glass fiber reinforced polymer, contact teeth made of tinned brass or copper or aluminum, bolt made of dacromet steel, and the special contact blade guaranteed the best contact surface
The connection of main circuitries, the connection of main circuitry and outdoor circuitry, the connections of main circuitry and electric appliance and street lamps
Applicable to T connection of structural distribution system,the connection of airy low voltage insulated cable, or indoor electric wire,distribution system of street lamp
Can be installed with online line and can work without power
Purpose of insulation piercing connectors (IPC) is to connect main and one (PC13), two (PC24) tap conductor's of section, how is written on IPC body
Type without letter B serves to connect isolated conductors,with letter B bare conductors