Infrared Induction With Motion Sensor 18w 1650lm T8 Led Tube Lights 120cm

 

Infrared Induction With Motion Sensor 18w 1650lm T8 Led Tube Lights 120cm

 

 

 Quick details:

 

●No RF interference, no flickering, no humming

●electric wave resistant, Instant start

●can rotate the end cap to be easily installation

●Special view angles LED lighting design

●With heat protection system, can work under unstable voltage

●New inner high efficiency 90% constant current driver

 

 

In the underground parking, the light is18w LED T8 tube, it is the 3watts to save energy when no body or cars enter in the sensor area. if the tube is installed in 3meters height, the sensor diameter is 6meters,and the beam angle is 120°.when the car enters in the area, the light will be full lighting, and the overtime is in 30 seconds, then down to 3watts after the man is away from the area.

 

 

Specification

 

Input voltage	AC85~265/50~60HZ
Rated power	18watts
Min power	3watts
Color temperature	5500-6500k(frosted cover)
Cover type	Frosted/clear/stripe
Base type	G13 medium Bi-pin
Dimension	D26*L1200mm
Luminous flux	1650lm(frosted cover)
Inductive beam angle	120°
Inductive distance	6m
Inductive overtime	25~30s(factory set)
Reaction time	0.5s
Power factor	0.95
Work temperature	-20℃~55℃

 

 

Application    

 

Hotels , Hospitals, Commercial Complexes

Conference / Meeting rooms 

Factories & Offices

Residential / Institution Buildings, Schools, Colleges & Universities

Places where need energy saving and high color rendering index lighting

 

 

Competitive Advantage:

 

1. Cheap price

2. Use PC cover and aluminum heat radiator for the led lamp to make the light efficiency in best.

3. Stable performance; Uniform luminous, reasonable light distribution, good glare control.

4. Internal power driver in the lamp, light weight and beautifull appearance, easy installation and maintenance

 

 

 

• Don’t take the tube apart
• Recommend indoor use
• The tube must work under the right voltage according

to the specification.

• Can be placed in conventional T8 or T10 fluorescent brackets

        (remove starter before replacement !)

 

• Warning : risk of electric shock! ensure that the power supply is off when wiring sections of
• this device.this device is to be installed by a qualified electrician or technician in accordance
• with all relevant local codes. please read this user guide completely prior to installation and
• please pre-plan the installation.
• Note: please remove Bi-pin shipping protectors from end of tubes prior to installation

Unpacking

• 1. Unpack and carefully examine the product
• 2. Report any damage and save all packing materials if any part is damaged during transport
• 3. Do not attempt to use this apparatus if it is damaged
• Before you start: Installation of your new LED tube is simple, but requires a basic knowledge of
• wiring(as shown below).if you do not feel comfortable with this type of wiring, Sanding LED
• would recommend consulting a qualified electrician.

 

Note:  please ensure that power is disconnected from fitting before installing LED tube

 

 

Mechanical Dimensions

 

  T8 1.2M LED Tube Light

●tube length: L1=1198±1mm

●total length: L2=1212±1mm

●lighting length: L3=1160±1mm

●tube diameter: Φ1=26mm/30MM

●end cap diameter: Φ2=29mm/33MM

●Tube material: Aluminum alloy

●cover material: PC

Induction Sketch

 

Remark: motion sensor led tube is not workable in the fixture with Cover

     (workable)                     (unworkable)

 

 

Packing ways

 

 

Packing detail
 

Parameter	Value	Unit
Paper tube	Φ38 * 1228	mm
Carton ( L * W * H )	1280 * 260 * 215	mm
Quantity per carton	30	paces
N.G per led tube	354	g
N.G per paper tube	170	g
G.W per carton	18	kg

 

Installation: