1 / 6
Model No. : | Industrial nylon rubber NN carcass conveyor belt |
---|---|
Brand Name : | Dengren |
Product description
(1)material of conveyor belt carcass:NN100,NN150,NN200,NN250,NN300,NN350,NN400,NN450,NN500 | ||||||
(2)Width of belt:300mm-1600mm | ||||||
(3)number of fabric layer:2-10 ply | ||||||
(4)Thickness of cover rubber:top working side:1.5-8.0mm,bottom non-working side:1.5-4.5mm | ||||||
(5)Cover rubber:Tensile strength: not less than 12Mpa, elongation at break: not less than 350%, the abrasion loss:not more than 200mm3 |
Grade | Application |
Belts with defined mechanical parameters | |
W | anti-abrasive cover with good mechanical properties |
X | abrasion and cut resistant cover for sharp-edged or lumpy material, highest requirements |
Y | cover with good mechanical properties for standard applications |
Z | cover for minor applications |
Underground mining | |
K | flame-retardant and anti-static for above ground and underground deployment |
S | flame-retardant and anti-static for above ground and underground deployment |
V | self-extinguishing and anti-static for the highest safety requirements in underground mining |
Oil and fat resistance | |
G | transport under conditions affected by oil or fat |
A | food quality (oil, fat and temperature) |
Heat and cold resistant | |
R | for application at temperatures below 0 °C, down to -60 °C |
T | heat resistant, transport of hot material |
Acid resistant | |
C | transport of acidic material |
Other cover materials and details on request. |
Standards | Cover Rubber | Adhesion | ||||
Tensile Strength | Elongation at break | Abrasion | Cover to Ply | Cover to Ply | Ply to Ply | |
DIN 22102 | Mpa | % | mm3 | N/mm | N/mm | N/mm |
(≤1.5mm) | (>1.5mm) | |||||
DIN 22102-Z | 15 | 350 | 250 | 3.5 | 4.5 | 5 |
DIN 22102-W | 18 | 400 | 90 | 3.5 | 4.5 | 5 |
DIN 22102-Y | 20 | 400 | 150 | 3.5 | 4.5 | 5 |
DIN 22102-X | 25 | 450 | 120 | 3.5 | 4.5 | 5 |
Standards | Cover Rubber | Adhesion | ||||
Tensile StrengTD | Elongation at break | Abrasion | Cover to Ply | Cover to Ply | Ply to Ply | |
AS 1332 | Mpa | % | mm3 | N/mm | N/mm | N/mm |
(≤1.9mm) | (>1.9mm) | |||||
AS 1332-N17 | 17 | 400 | 200 | 4 | 4.8 | 6 |
AS 1332-M24 | 24 | 450 | 125 | 4 | 4.8 | 6 |
Standards | Cover Rubber | Adhesion | ||||
Tensile Strength | Elongation at break | Abrasion | Cover to Ply | Cover to Ply | Ply to Ply | |
SANS 1173 | Mpa | % | mm3 | N/mm | N/mm | |
A | 18 | 400 | 70 | 5 | 7 | |
C | 20 | 400 | 150 | 5 | 7 | |
M | 25 | 450 | 120 | 5 | 7 | |
N | 17 | 400 | 150 | 5 | 7 |
Standards | Cover Rubber | Adhesion | ||||
Tensile Strength | Elongation at break | Abrasion | Cover to Ply | Cover to Ply | Ply to Ply | |
RMA | Mpa | % | mm3 | N/mm | N/mm | N/mm |
(≤1.6mm) | (>1.6mm) | |||||
RMA-I | 17 | 400 | 3 | 4.4 | 4 | |
RMA-II | 14 | 400 | 3 | 4.4 | 4 |
Send your inquiry to this supplier