IMC type Chemical Process Magnetic Driven Pump

Specifications IMC type Chemical Process Magnetic Driven Pump

Rpm (n): 1450/2900r/min;

         Product Description      1.1. Introduction IMC series magnetic drive pumps are standard chemical process pumps, which can be classified into horizontal, cantilever, single-stage, single suction centrifugal pumps. They all comply with DIN24256, ISO2858, GB5662-85, API685 standards. The greatest figure of the pumps is 100% non-leakage. They are suitable for transferring liquids, whatever is low-temperature, or high-temperature, neutral or corrosive, clean or toxic, flammable or explosive liquid.   Applications   This pump can substitutes for shaft seal pump and canned motor pump, which is suitable for transporting different kinds of liquids, particle containing, clean but flammable explosive, toxic, corrosive or valuable liquid, in chemical, petrochemical, pharmaceutical, printing and dyeing and other industries. No leakage magnetic drive pump is an ideal chemical equipment, which can bring those enterprises in above mentioned industries higher both economic and social benefits in aspects of increasing production and cutting expenditure, eliminate pollution, environment protection, safety in production and labor protection.   Pump model and operating condition IMC Series magnetic pumps have 31 basic models, The rotation speed is 2900r/min or 1450r/min. Operating conditions: Ambient temperature: less than 40 °C; Flow rate (Q): 6.3 ~ 400m3 / h; Head (H): 5 ~ 136m; Dynamic viscosity: μ ≤ 20cP; Rpm (n): 1450/2900r/min; Operating temperature: -45 ~ 250 °C; Operating Pressure: 2.5MPa; Drive power (equipped motor power); 2.2 ~ 280KW. For the performance of IMC series magnetic drive centrifugal chemical process pumps (basic type), please refer to the performance table. Model Description Model composition IMC—XX—XX—XXX I A 1          2       3    456 1 Pump series name (English abbreviation): International standard conformity magnetic drive centrifugal chemical process pump 2 Suction diameter (mm) 3 Discharge diameter (mm) 4 Nominal diameter of impeller (mm) 5 Pump structure type (“Ⅰ”is direct coupled connection type.”Ⅱ” is intermediate shaft coupling connection type) 6 Impeller cutting order (A BCD are ordinal the first cutting to the fourth cutting) For example: IMC—65—40—160 I A 1 Pump series name ( English abbreviation): International standard conformity magnetic drive centrifugal oil pump 2 Suction diameter is 65mm; 3 Discharge diameter is 40mm; 4 Nominal diameter of impeller is 160mm; 5 Pump structure type: (Ⅰis directly coupled connection type.) 6 Impeller has experienced the first cut;