IC697MDL653 Discrete Input Module

The IC697MDL653 is a Positive / Negative Logic Input Module with 32 points. This 24 VDC module is manufactured by GE for the 90-70 Series. Its 32 input points are arranged in four isolated sets comprised of eight points. GE Series 90-70 Cpu Parts,Io Bus Terminator Plug,Ge Fanuc Terminal Block PLC CPU PARTS Programmable PLC Communicate MODULES Robots DCS. This particular fan tray provides an additional rack cooling system with two fans per assembly. The rack fan is easily installed as an accessory with the five slot and PACSystems RX7i nine-slot racks. The IC697ACC621 is ideal for systems where heat build-up is a potential problem. The system offers a low noise level and uses ball bearings for an extended life span. The manufacturer does recommend that the fans be wired to the same power source as the PLC as this will ensure the fans run each time the PLC is actively in use.To wire the fans, use the parallel cable assembly supplied with the fan, which is located on the back of the fan assembly. The IC697ACC621 fan tray is compatible with the IC697CHS750, IC698CHS009, and IC697CHS109 racks. When mounted on the rack, the unit is located on the bottom to allow the air to flow from the bottom to the top of the rack for cooling. Easy installation is completed with only a #2 Phillips head screwdriver. A minimum of 9 inches of space is needed between racks to remove each individual fan and can be accomplished by removing the three screws from the front lower panel of the rack. Simply position the fan assembly on the bottom rack, and slide the flange on the rear of the assembly. Align the holes, reinstall, and tighten the screws. Each fan has a replaceable polyurethane filter that can be cleaned between replacements if needed.

Additional features of the IC697MDL653 include Positive/Negative Logic and proximity switch compatibility, a selectable input filter, and a single input configured as an interrupt. These features are common in all IC697 PLCs. The features may, however, not be applicable when IC697MDL653 is coupled with other types of PLCs. The IC697MDL653 module also comes equipped with LED indicators on its faceplate to alert the user to the module`s status. These LEDs indicate the on/off status of each point on the PLC side of the circuit.

Conveniently, the module`s input/output references can easily be configured by the user without the use of jumpers or DIP switches. The IC697MDL653 is designed to have both positive and negative logic characteristics; thus it is able to source current from the input device to the common user. The applicable input device is connected to the power bus and the module input. The following input devices are all compatible with the IC697MDL653: pushbuttons, limit switches, selector switches, and electronic proximity switches including 2-wire and 3-wire types.

Ideally, inputs on this module are driven by any IC697 PLC voltage compatible output module. The input circuit provides enough current to ensure that the device functions reliably. The input current is typically 10mA in the ON state and can accept 2 mA leakage current in the OFF state without turning on.

IC697CHS750 A five slot rear mounting PLC rack, the GE Fanuc 90-70 IC697CHS750 accepts all IC697 PLC module types. Featured on the GE Fanuc 90-70 IC697CHS750 are rear...  
IC697CHS770 GE Fanuc 90-70 IC697CHS770 Accepts all IC697 PLC module types, and IC687 (VME) I/O and Communications module types. GE Fanuc 90-70 IC697CHS770 Accepts plug-in...  GENERY ELETRIC IC200ALG264

GENERY ELETRIC IC200ALG322

GENERY ELETRIC IC200ALG620

GENERY ELETRIC IC200ALG630

GENERY ELETRIC IC200MDL740


GENERY ELETRIC IC693ACC310

GENERY ELETRIC IIC693ALG223

GENERY ELETRIC IC693APU300

GENERY ELETRIC IC694ALG392

GENERY ELETRIC IC693MDL645

GENERY ELETRIC IC693MDL646

GENERY ELETRIC IC693MDL655

GENERY ELETRIC IC693MDL730

GENERY ELETRIC IIC693MDL740

GENERY ELETRIC IC693PCM301

GENERY ELETRIC IC693MDL753

GENERY ELETRIC IC693PWR321

GENERY ELETRIC IIC694BEM331

GENERY ELETRIC IC693PWR330

GENERY ELETRIC IC694APU300

GENERY ELETRIC IC694MDL645

GENERY ELETRIC IC694MDL655

GENERY ELETRIC IC694MDL740

GENERY ELETRIC IC694MDL753

GENERY ELETRIC IC695PBM300

GENERY ELETRIC IC698CRE030

GENERY ELETRIC PQMII-T20-C-A

GENERY ELETRIC DS215SDCCG1AZZ01B
IC66* Triple Modular Redundancy Systems. GE...