Hydraulically Powered Submersible Dewatering and Trash Pumps
Hydraulically Powered Submersible Dewatering and Trash Pumps
Hydraulically Powered Submersible Dewatering and Trash Pumps

1 / 1

Hydraulically Powered Submersible Dewatering and Trash Pumps

Get Latest Price
Send Inquiry
Model No. : tp40
Brand Name :

Product description

INTRODUCTION
Our hydraulically powered submersible dewatering and trash pumps have been engineered
To provide long lasting pumping performance with economic advantages that no other
Pump can match. Yet, even a well-designed and well-built pump can malfunction or become
Hazardous in the hands of an experienced or untrained user. Anyone that operates or comes
In contact with these products must thoroughly read and understand this manual and related
Equipment manuals prior to handling, operating or servicing these pumps.

SAFETY RULES
1. Only use the pump in accordance with the manufacturer's specifications and limitations.
2. Only trained personnel shall operate the pump, conduct maintenance or repairs. A trained
Person has read and thoroughly understands this instruction manual and related equipment
Manuals and, through training and experience, has shown knowledge regarding safe
Operational procedures.
3. Always use appropriate personal protection equipment (PPE) including, but not limited
To: Eye and ear protection, safety shoes, hard hat and work gloves.
4. Safety goggles must be worn at all times by the operator and any persons or bystanders
Within 100 feet of the pump or its discharge point.
5. Never lift or lower the pump by its hydraulic hoses; Use a cable and a lifting eye where
Applicable.
6. Do not use any hose showing signs of damage or wear, including both hydraulic and
Discharge hoses.
7. Secure the discharge hose before operating.
8. Do not allow the discharge hose to be kinked while in operation. If pumping in a shallow
Basin use a 90 degree elbow on the pump to prevent kinking.
9. Keep all body parts clear from discharge hose and pump inlet. Keep all body parts
Away from pressurized hydraulic hoses.
10. Always stop hydraulic power source and depressurize the hydraulic system before
Connecting or disconnecting hydraulic hoses.
11. Never try to adjust or service the pump while connected to a hydraulic power source.
12. Hydraulic hoses must be rated for 2500 PSI working pressure and hydraulic power
Source must not provide more than 2250 PSI at any time
BEFORE OPERATION
1. Anyone that operates or comes in contact with these products must thoroughly read
And understand this manual and related equipment manuals prior to handling, operating
Or servicing these pumps.
2. Check hydraulic flow and relief pressure at the power source. Never exceed the pumps
Maximum flow rate or pressure. The power source must be open center, single directional
And have an unrestricted flow from the pump back to the reservoir.
3. Inspect all hoses for breaks, cracks, abrasions, kinks, bulges or erosion from chemical
Exposure before use. Replace damaged hoses before use. Inspect pump for damage
And insure all decals and warning labels are intact and legible.
SET UP AND WORK AREA
1. Do not allow the discharge hose to be kinked while in operation. If pumping in a shallow
Basin use a 90 degree elbow on the pump to prevent kinking.
2. Keep all body parts clear from discharge hose and pump inlet. Keep all body parts away
From pressurized hydraulic hoses.
3. Ensure all coworkers and bystanders are kept at a safe distance from all mechanical
Equipment including the pump and its discharge point.
4. To start the pump, turn on the hydraulic flow making sure not to exceed the rated flows
And pressures.
5. If the pump fails to perform, properly check the troubleshooting chart in the back of this
Manual for possible causes. Never attempt to service the pump while connected to a
Hydraulic power source.
Send Inquiry

Product Alert

Subscribe to your interested keywords. We will send freely the latest and hottest products to your Inbox. Don't miss any trade information.

版权所有 © 宁波全贸信息技术有限公司 浙ICP备12012821号-1 浙B2-20200628