Hydraulic Universal Testing Machine (UTM)

Specifications (1) With three-dial full range;

(2) Suitble for tension and bending resistance test;

(3) Easy operation and high accuracy

1. introduction
Model WE series hydraulic universal testing machine UTM adopts the design of placing hydraulic loading system, swing force test system, main engine, ergometer separately. It has the characteristics of operation amenity, working steady, high accuracy and loading steady. It is used to stretch, compress, curve and cut metalloporphyrin, cement, concrete, plastics and so on. The apparatus has automatic depict device and loading speed indicator, you can shift three loading velocity in each range. 2. structure
The main engine consists of an adjustable support base, screw thread pole, moveable crossbeam (lower clamp set) and a working frame working oil tank, piston, platform, support and upper crossbeam (upper clamp set). Element of this apparatus: high-pressure oil pump supplies oil to working oil tank, the piton moves and press board and upper crossbeam to do stretch and press test. The stretch test is done in the space between upper crossbeam and movable crossbeam. The lift motor, gear, chain drives to rotate at a same speed to move the crossbeam. 3. Characteristics
It has advantages such as high precision, light weight, easy operation, clamping automatic hydraulic pressure, long use life and so on. It is applicable for detecting various indexes such as tension, compression resistance, bending etc. to metal and non-metallic material in various laboratories. 4. Main technical parameters

Max. test force	100KN
Measuring range and dial min. scale value	0-20KN 0.05KN/grid 0-50KN 0.1KN/grid 0-100KN 0.2KN/grid
Measuring relative error (no higher than)	±1%
Max. distance between tensile jaws	620mm
Width of flat plate specimen	≤60mm
Flat specimen holding thickness	0-15mm
Diameter of round specimen	6-20mm
Clip diameter of round specimen with shoulder	10, 13mm
Specification to rib and ribbed round specimen	M10
Distance between bending support rollers	100-460mm
Size of shearing specimen	10mm
Tensile space span between two columns	392mm
Compression space between two pole supports	392mm
Piston stroke	150mm
Oil pump motor power	2.2kW
Main frame dimension	760×460×1965mm
Dynamometer dimension	1050×770×1778mm