Sign In Join Free
1 / 3
Huawei HONET UA5000 IP DSLAM with A32/A64 Analog Board
| Model No. : | UA5000 |
|---|---|
| Brand Name : | Huawei |
Product description
To address the tendency toward this type of access network, Huawei HONET UA5000 multi-service access product integrates traditional voice, VoIP, private line, PBX, video, and multimedia services for subscribers. It provides GE, FE, E1, GPON, and EPON network ports for transmitting services upstream. Huawei HONET UA5000 can be used in scenarios such as integrated access, broadband access, and enterprise access. Appearance of A32/A64 Analog board and UA5000
Highlight Features Smooth Evolution By supporting V5, H.248, and Session Initiation Protocol (SIP), the UA5000 is adaptable to PSTN, NGN, and IMS networks and can also be used in gigabit and Ethernet passive optical networks. Traditional Services Retained The UA5000 provides all service ports required for a traditional network (including the POTS, ISDN BRA/PRA, E1, TDM G.SHDSL, V.24/V.35, E&M, FXO/FXS, R2, and two/four-wire audio ports). As a result, all traditional services are retained when evolving from a TDM network to an IP network, and subscribers do not have to change terminals. The UA5000 supports various traditional private services on a TDM/PSTN network – as well as IP semi-permanent connection (SPC) and pseudo wire emulation edge-to-edge (PWE3) features – on an all IP-based network. This ensures that the UA5000 supports all traditional private services on PSTN, NGN, IMS, and FTTx networks without affecting services during network evolution. The UA5000 provides a 32-port combo board that has the functions of the POTS, ADSL2+ and SPL boards. The UA5000 with a combo board requires less distribution cables and main distribution frames (MDF), which translates into less time on wire seating and easier operation and maintenance.High-Speed Broadband Access The UA5000 supports: 1) the ADSL2+ and VDSL2 technologies to achieve a maximum transmission rate of 100Mbit/s to the desktop; 2) EFM G.SHDSL 4-wire bonding technology to meet enterprise user requirements for high-speed service access; 3) Internet Group Management Protocol Versions 2 and 3 (IGMPv2 and v3) to provide MVLAN and IPTV services, which have become new sources of revenue for operators. Energy-Saving The UA5000 is the first multi-service access device in the world to meet the European Union's CoC energy-saving requirements. With an optimized design and low power consumption components, on average, UA5000 combo and ADSL service boards consume 10% less power than the similar boards, and 64-port POTS boards consume 20% less power than the industry-standard 32-port POTS board. In addition, the UA5000 uses intelligent fan speed adjustment technology, which reduces fan power consumption more than 50%. Flexible Installation The UA5000 provides indoor and outdoor cabinets to meet operators' requirements for flexible deployment and rapid installation. For eight consecutive years, Huawei has been ranked number one in the global market for its multi-service access node (MSAN) solution. The superior networking and terminal interconnection performance of the UA5000 ensures system maturity and service stability, which in turn improves network deployment efficiency. Thanks to its ability to retain all traditional TDM services and powerful service functions, the UA5000 is the best choice for PSTN network reconstruction. Furthermore, it enables smooth network evolution and ensures investment gains. UA5000 broadband services help Huawei's customers broaden their revenue sources. UA5000 professional network cutover solution and line operation & maintenance solution help operators implement network evolution more efficiently, helps enhance network reliability, and reduce operation and maintenance costs. Technology Boards supported by UA5000
Board Type | Silk Screen | Full Name | Function | Slot |
|---|---|---|---|---|
Narrowband control board | PVMB | Packet voice processing board | Manages the narrowband service boards and processes the V5 and H.248 protocols. Two PVMB boards can be configured for backup. |
|
PVMD | Packet voice processing board | Manages the narrowband service boards and processes the V5 and H.248 protocols. Two PVMD boards can be configured for backup. | ||
Broadband control board | IPMB | IP service processing board | Aggregates and processes the broadband services, forwards the VoIP services of the PVMx board, and transmits services upstream to the IP network through the FE or GE ports. |
|
IPMD | IP service processing board | Aggregates and processes the broadband services, forwards the VoIP services of the PVMx board, and transmits services upstream to the IP network through the FE or GE ports. | ||
Broadband service board | ADRB | 32-channel ADSL/ADSL2+ service board | Works with a built-in splitter. The board communicates with the broadband control board through the backplane, and the broadband control board transmits the services upstream to the IP network. |
|
ADRI | 32-channel ADSL/ADSL2+ service board | Works with a built-in splitter. The board communicates with the broadband control board through the backplane, and the broadband control board transmits the services upstream to the IP network. | ||
SHLB | 16-channel SHDSL.bis service board | Provides 16 ATM/EFM G.SHDSL.bis ports. The board communicates with the broadband control board through the backplane bus. | ||
VDMB | 16-channel VDSL2 service board | Works with a built-in splitter. The board provides a 16 VDSL2 ports, supports line protection, and reserves the GE electrical port and optical port on the front panel. | ||
Narrowband service board | A32 | 32-channel analog service board | Provides 32 analog service ports. The board supports the BORSCHT function for the analog subscriber line. The service signals are transmitted to the narrowband control board through the backplane, and the narrowband control board transmits the PSTN service upstream. |
|
A64 | 64-channel analog service board | Provides 64 analog service ports. The board supports the BORSCHT function for the analog subscriber line. The service signals are transmitted to the narrowband control board through the backplane, and the narrowband control board transmits the PSTN service upstream. | ||
CDI | 16-channel direct dial-in service board | Provides the transparent transmission of analog service signals. | ||
DSLD | 16-channel ISDN digital service board | Provides access to 16-channel ISDN subscribers. | ||
VFB | 16-channel voice frequency interface board | Provides sixteen 2-wire or eight 4-wire voice frequency ports. | ||
VMS | 16-channel message LED analog service board | Provides 16 analog service ports. | ||
ATI | EM2/EM4/AT2 analog interface board | Provides six channels of analog trunk signals | ||
DDU2 | Data service interface board | Provides two equidiectional 64 kbit/s ports. | HABA: 6-35 | |
SRX | Sub-rate data interface board | Provides five V.24 ports. | ||
SDLE | 8-channel TDM SHDSL and 8-channel E1 service board | Provides eight SHDSL ports and eight E1 ports to implement E1 and V.35 access services, and transmits transparently and aggregates E1 access services over the SHDSL services. |
| |
EDTB | E1 digital trunk board | Provides 16 E1 ports to transmit services upstream or provide access to subscribers. |
A shelf can be configured with six EDTB boards, and the boards must be installed in six consecutive slots. | |
Combo service board | CSRB | 32-channel ADSL/ADSL2+ and POTS combo service board | Works with a built-in splitter. The broadband services are transmitted to the broadband control board through the broadband bus, and the broadband control board transmits the services upstream to the IP network. The narrowband services are transmitted to the narrowband control board through the HW bus, and the narrowband control board transmits the services upstream to the PSTN network. |
|
Subscriber test board | TSSB | Subscriber test board | Supports the test functions of the analog service port (Z port) and the ISDN digital service port (U port). |
|
Power board | PWX | Secondary power board | Provides +5 VDC, -5 VDC, and 75 VAC 25 Hz (ringing current) power supplies. |
The HABD shelf is configured with the H605PWX or H607PWX board. |
Rear access transfer board | E1TB | Rear access E1 transfer board | Transfers E1 signals of the EDTB board to the cabling area of the shelf. | - |
HWCB | Rear access HW transfer board | Provides two clock input ports, two E1 ports, and one HW port to connect to the subtended HABA shelf. | ||
HWTB | Rear access HW transfer board | Provides one HW port to connect to the HABA shelf. | ||
RATB | Rear access 32-channel relay transfer board | Supports the circuit test, loop-line test, and port backup according to the requirements of service boards. | ||
SAPB | Rear access subscriber cable transfer board | Transfers 32 channels of service signals of the CSRB board to the cabling area of the shelf. The board supports line protection. | ||
Front access transfer board | E1TF | Front access E1 transfer board | Transfers E1 signals of the PVMB board to the cabling area of the shelf. | - |
EFTF | Front access FE transfer board | Transfers the eight channels of FE signals of the IPMB board to the cabling area of the shelf. | ||
HLAF | Front access high speed link transfer board from the master shelf to the extended shelf | Used in the HABD shelf. The board connects to the HLEF transfer board of the HABF shelf through the DB-68 port on the front panel. | ||
HLEF | Front access high speed link transfer board of the extended shelf | Used in the HABF shelf. The board connects to the HLAF transfer board of the HABD shelf through the DB-68 port on the front panel. | ||
HWCF | Front access HW transfer board of the master shelf | Provides one test port, one clock input port, and three HW ports to connect to the subtended HABD or HABF shelf. | ||
HWTF | Front access HW transfer board of the slave shelf | Provides two test and alarm ports, one clock input port, and one HW port to connect to the HABD shelf. | ||
PSTF | Front access power interface board | Provides one environment monitoring serial port and one -48 V power port. | ||
RATF | Front access 32-channel relay transfer board | Supports the circuit test, loop-line test, and port backup according to the requirements of service boards. | ||
SLTF | Front access subscriber cable transfer board | Used in the HABD shelf and the HABF shelf. The board transfers subscriber signals to the cabling area of the shelf. | ||
SAPF | Front access subscriber cable transfer board | Transfers 32 channels of subscriber signals of the CSRB or ADRB/ADRI board to the cabling area of the shelf. The board supports line protection. | ||
Upstream interface board | EP1A | EPON upstream interface board | Supports the EPON upstream transmission of the IP service. |
|
GP1A | GPON upstream interface board | Supports the GPON upstream transmission of the broadband and narrowband services. |
After-Sales Service 1,We can provide detail documents and remote help for device installation and configuration. 2,Warranty: 1 year. ( After the quality guarantee period began to charge appropriate maintenance service fee.)3,Our company promises goods enjoy full return due to quality problem since goods delivered within 7 days or 15 days , returned goods must keep original state and it’s accessories are complete. 4,Jenney Very Glad to Serve You! Company Information Combasst Industry Development (Shanghai) Co,.Ltd, which provides main services in terms of broadband communications and information technology industries, is a high-tech enterprise integrating research and development, production, sales, and service. Our products mainly cover the optical signal transmission and access, signal transmission and access, photoelectric signal conversion and photoelectric signal.
The clients include major national telecom carriers, as well as radio and television, electricity, mining and other industry professional net users. We have already established long-term friendly and cooperative relations with them. In addition, our company has been actively expanding into foreign markets. The products are exported to many foreign clients in Europe, America, Southeast Asia, and the Middle East as well as Japan, Korea and other neighboring countries and regions.
Combasst Industry Development (Shanghai) Co,.Ltd Address: Room 110,No.389 JinWan Road, ShangHai , China Telephone: +86-021-51758132
Fax:86-021-58714662 Attn: Jenney Yu Trademanager:cn1511670985 Skype: Jenney yu
FAQ Not exactly what you want? 1 request,multiple quotations Get Quotations Now >> Send your inquiry to this supplier
Product Alert
Subscribe to your interested keywords. We will send freely the latest and hottest products to your Inbox. Don't miss any trade information.
Your use of this website constitutes acknowledgement and acceptance of our Terms & Conditions.
Copyright © 2009-2024 Bossgoo Co., Ltd. All rights reserved.
