Hot sale rotary dryer/coco pith dryer/sawdust dryer for sale
Brief introduction of rotary dryer:
Rotary drum dryer is a type of industrial dryer, which is applied to reduce moisture content of materials such as mineral ores, chemicals, biomass, wood sawdust, construction materials and etc.
Rotary dryer is made up of a large, rotating cylindrical tube, usually supported by concrete columns or steel beams. Its slopes slightly so that the discharge end is lower than the materials feeding point, in order to force the materials out trough the dryer under gravity.
The rotary dryer can use gas, oil, coal, even wood or biomass as fuel. Characteristics of our rotary dryer: 1. Factory direct sale dryer with reasonable price and excellent design, installation and after-sale service. 2. Dry strongly in short time. The moisture in the dried sawdust is even and steady. 3. Simple structure and small area occupied. Easy to build and repair. 4. Large handling capacity and high heat efficiency. When drying unbound water, its heat efficiency can reach 70%.
Operating principle of rotary dryer: Rotary dryer includes rotating cylinder, feed port and discharge port,belt conveyor or sprial conveyor, dust remover. Wet sawdust is continuously sent to the drying cylinder by a conveyor. Hot air makes full contact with the material. Being delivered and scattered by the high-speed hot air, water in the wet material is evaporated. The sawdust gets fully dried in the rotating cylinder, thus the quality is ensured.
Application of rotary dryer: Sawdust dryer of air flowing type is widely used in industries like straw briquette fuel, charcoal machinery, wood pellet fuel, sawdust briquette, farming and animal husbandry engineering etc., such as the drying of agricultural fiber materials like maize straw, soybean straw, cotton straw, wheat straw, sorghum stalk, wood flour, wood shavings, sawdust, ginkgo leaves, mulberry leaves. Technical parameters of rotary dryer:
Model | φ0.6×6-8 | φ0.8×8-10 | φ1.0×8-12 | φ1.2×10-14 | φ1.5×12-16 | φ1.8×16-20 | φ2.0×18-22 | φ2.2×20-24 | φ2.4×22-26 |
Diameter(mm) | 600 | 800 | 1000 | 1200 | 1500 | 1800 | 2000 | 2200 | 2400 |
Length (m) | 6-8 | 8-10 | 8-12 | 10-14 | 12-16 | 16-20 | 18-22 | 20-24 | 22-26 |
Thickness(mm) | 6 | 8 | 8 | 10 | 12 | 12 | 14 | 14 | 14 |
Volume (m3) | 1.7-2.3 | 4-5 | 6.3-9.4 | 11.3-15.8 | 21.2-28.3 | 40.7-50.9 | 56.5-69 | 76-91.2 | 99.5-117.6 |
Lifting blade | Elevated lifting type, Cross lifting type, fan-shaped lifting type, sleeve lifting type, etc. |
Laying gradient | 3°-5° |
Fill rate | 8-20% |
Material | Heat-resistant steel, stainless steel, cast steel, carbon steel, etc. |
Usage temperature | 180-800C° |
Evaporation intensity | 5-120 kg/m3.h |
Heat method | Downstream and upstream, direct heat transfer, indirect heat transfer, compound heat transfer |
Heat source | Coal, oil, electricity, gas, steam, biofuels |
Rotate speed | 3-8 r/min |
Transmission power | 3 kw | 4 kw | 5.5-7.5 kw | 11-15 kw | 15-18.5 kw | 18.5-22 kw | 22-30 kw | 22-37 kw | 37-55 kw |
Corollary equipment | Conveyor equipment, hot blast stove, dust removal equipment, etc. |
Remarks | Besides the above models, we can also supply special model as your request. |
Product delivery
What about Hengjia? Zhengzhou Hengjia Machinery Manufacturing Co. , Ltd is a joint-equity enterprise, which is specialized in research and development, producing and manufacturing of all kinds of drying machinery and energy conservation and environmental protection heat source. The dryer developed by our corporation for the drying of coal slime, sludge, saw dust, sand, coal ash, flue gas desulfurization gypsum, sprayed corn bran and all kinds of food and mining industry has professional technical ability and distinguished product performance and sell very well in more than 30 provinces of China, also in abroad, like Russia, Korea, Vietnam, India, Malaysia, Indonesia, Pakistan and so on. If you are interested in our rotary dryer, please kindly contact with us~ Skype: lisa.hjm WhatsAPP: +86-18317887657 Tel: +86-371-67845338