Hot Melt Glue for Bookbinding Machine

Hot Melt Glue/Adhesive1. Color: White granule2. Softening Point: 81~91centigrade3. Application Temp. 160~180 centigradeHot melt glue for book bindingHot Melt Adhesive Clear glue with high grade qualityCharacteristics: Thermoplastic hot melt adhesive, 100% solids content. Perfect binding of books on automatic applicator, good adhesive strength, good processing characteristics. FOR ART PAPER AND SO ON WITH HIGHT DEMANDPropertiesSpecsTesting methodsBaseEthylene vinyl acetate copolymersSharpe: Granule: ObservationColor: White: ObservationSoftening point: 86± 5° C: ASTM-E28(R&B)Open time: 15 SEC: Texyear(HMA-04-01)Setting time: 2 SEC: Texyear(HMA-05-01)Viscosity: Brook field viscometer LVT spindle #34Instruction for use: 1. Operation temperature: 160-180° C2. Application methods: RollerNotice: Open time is changeable, depending upon the nature of the substrate, application temperature, thickness of adhesive applied, room temperature and closing pressure. Do not touch the molten adhesive. In case of burns from hot adhesive, immediately flush skin with cold water and cover with a clean dressing do not remove adhesive. Have burn treated by a physician. All surfaces should be clean and free of loose elements. Do not heat the adhesive over 180° C in prolonged time to avoid material decomposition and consequent decreased properties. Always keep containers tightly capped when not in use. Note: Product color may vary due to different raw material batch. This variation does not impact on product properties