Anping county shengxiang metal products co.,ltd Sales manager Kevin mei Electro Galvanized Iron Wire Processing & Features:This kind of galvanized wire is made with choice mild steel, through wire drawing, wire galvanizing and other processes. Electro galvanized iron wire has the characteristics of thick zinc coating, good corrosion resistance, firm zinc coating, etc. Steel wire rod wire drawing wire annealing rust removing acid washing zinc feeding wire coling 1.Material: The type of wire rod is Q195, element composition is as follows:C≤0.07; S≤0.023; Si≤0.09; Mn≤0.32; P≤0.025.Because This type of wire rod has less Impurities, Q195 is fit for drawing. The diameter is 6.5mm.
2.Drawing
Galvanized wire's first stage is drawing.there are two kinds of drawing machine: powder drawing and water drawing. powder drawing is fit for junior drawing(6.5mm~4.0mm). One powder drawing machine has 4 tanks and 4 molds. One tank is matched with a mold. Each of them are offered energy by a electromotor. 0.9mm(max)can be "eat" when the wire cross a mold. There are no loss of weight during drawing.
Powder is used as lubricant, which is made of soap and butter. Mold is hidden behind the powder
This picture shows "water draw" Water draw is used for senior draw.(≤4.0mm)The container is filled with water, soap and 8 molds. Compared with powder draw, water draw can save lots of room and the wire cannot be broken.
After drawing, the wire is thinner, but also very hard. The tensile strength is about 700N. These wire can be used to produce nail and mesh panel. For galvanized wire, it still need annealing 3.Annealing
Galvanized wire's second stage is anneal.Anneal is to low the tensile strength of wire. The stove is solid and built with red bricks. The architecture of anneal stove is cuboid. Different thickness of wire require different temperature. Range is from 700°C to 900°C. Output of the anneal stove, the tensile strength is 400N~600N. 4.Chlorhydric acid washing
Galvanized wire's third stage is chlorhydric acid washing.After the draw and anneal, the wire is thinner, softer but also much more dirty. It needs chlorhydric acid washing to remove the impurities. Chlorhydric acid washing requires water pool and chlorhydric acid pool. The density of chlorhydric acid is 17%. In the Chlorhydric acid pool, there is a caldron used for the emission of vapor. 5.Electro zinc coating
Galvanized wire's fourth stage: Zinc coating.After the chlorhydric acid pool, water pool is also necessary. In the zinc pool, displacement reaction is chemical and uniformly distributed. The surface of wire is smooth. Because wire cross the zinc pool fast, abundant zinc coating requires 4 zinc pools. 6.Standard coil
7.Package
8.certification
ANPING SHENGXIANG(factory) Contact: Kevin Mei Tel:0086-318-7758955 Fax:0086-318-7758978 cellphone:0086-18830828598 http://