HM-500 HIGH STRENGTH REBUILDING ADHESIVE FOR CONCRETE REPAIR

Specifications 1.Bicomponent modified epoxy resin injection anchor adhesive

2.Styrene free

3.Good thixotropy

4.Heat-resistant

  PROTECT YOUR HOME   PREPARE YOUR HOME FOR EARTHQUAKES   PREPARE YOUR HOME FOR HIGH WINDS AND HURRICANES   BUILD A SAFE STRONG DECK   YOU NEED THE HELP OF BUILDING REINFORCE ADHESIVE???     LOOK OUR INJECTION EPOXY-BASED ANCHORING ADHESIVE AS BELOW       HM-500 Injection-type Epoxy Anchor Adhesive is a two-component, 3:1 ratio, high solids, modified epoxy resin adhesive for use as a high strength, non-shrink anchor grouting material.   1. Uses a) Secure rebar or threaded rods to concrete. b) Fix drying hanging brackets on curtain walls and stone materials. c) Strengthen building structures. d) Fix many devices. e) Connect steel structures with concrete structures. f) Reinforce railways, public roads, bridges, water conservancy facilities and other projects which are reconstructed and extended. g) Fix advertisement boards, tunnel pipe lines, elevated road noise barriers and barricades. h) Pick-proof sealant around doors, windows and fixtures. i) Paste-over for crack injection.     2. Advantages a) Modified epoxy resin, styrene free, safe and non-toxic. b) High strength, strong adhesion, good toughness, effect is equivalent to be embedded. c) Aging resistance, acid-alkali resistance, no expansion, no creep, good seismic resistance performance and heat-resistant performance. d) Low moisture sensitivity,long-term load stability in a damp environment. e) Good thixotropy, especially suitable for anchoring the side or top. f) Resin and hardener are packaged by twin cartridge and mixed simultaneously through the mixing nozzle by special dispenser gun, which do not need manual mixing.     3. Physical Data

Appearance	Component A (Resin): white paste
	Component B (Hardener): red or black paste
Volume solids	≥99.5% (solvent free)
Mix ratio of volume	A : B = 3 : 1
Density of A & B mixed	1.50 ± 0.10 g/cm3
Viscosity of A & B mixed	18~22 Pa·s

4. Operation Process       Drilling holes                  Cleaning holes                 Injecting glues                    Anchoring                    Curing         SKYPE:athena251288   TRADEMANAGER:shhorse