Hilo OTR tire

Specifications Hilo OTR tire

1. Radial Off-the-Road(OTR) Tire 29.5R25

2. Load Index & Speed Grade: 216A2/200B

3. Two Star Rating

Hilo OTR tire Pattern Description: 1.The aggressive, self-cleaning tread design provides excellent traction and floatation in articulated dump truck and loader applications.
2.Wear & Cut resistant tread compound
3.Self cleaning tread
4.Low rolling resistance
5.Long life
6.Excellent traction & floatation
7.Reduced vibration & increased stability   Hilo OTR tire Specification:

SIZE	LOAD INDEX & SPEED SYMBOL	STAR RATING	TYPE	RECOM RIM INCH		PATTERN	OVERALL WIDTH	OVERALL DIAMETER	TKPH
23.5R25	201A2/185B	2 Star	T/L		Available September 2010
26.5R25	209A2/193B	2 Star	T/L		Available September 2010
29.5R25	216A2/200B	2 Star	T/L	25.00/3.5	in.	1.74	30	74.5	345
					mm	44	763	1893

  Off-The-Road Tire Information   1.     Tire Structure   2. Definitions. 1.1   Tire Size The size of each tire is indicated by nominal width and rim diameter in inches and mm. Radial Structure is indicated by the letter “R”. For some tire the aspect ratio is indicated by percentage. Example Radial Tire: 23.5R25 , 18.00R33 Bias Tire:  23.5-25, 18.00-33   1.2   Star Rating, Ply Rating and Load Index. The load capacity of a tire is indicated by the star rating( in case of radial tire) and the ply rating (in case of bias tire). The load index is applied in countries where the ETRTO standards are used. 1.3   Overall Diameter (OD) “Overall Diameter” is twice the section height of a new tire, plus the nominal rim diameter, including 24-hour inflation growth. 1.4   Overall Width (OW) “Overall width” is the width of a new tire, including 24-hour inflation growth, and including protective side ribs, bars or decorations. 1.5   Section Width (SW) “Section Width” is the width of a new tire, including 24-hour inflation growth and including normal sidewalls, but nor including protective side ribs, bars, or decorations. 1.6   Static Loaded Radius and Width (SLR, SLW) “Static Loaded Radius” is the shortest distance from the axle center to the contact surface of a tire and “Static Loaded Width” is the overall width of a tire, mounted on the approved rim at the specified inflation pressure and placed still and vertically on a flat board, and loaded with the specified load. 1.7   Original Tread Depth (OTD) “Original Tread Depth” is the tread depth of a new tire measured at the point of tread-indicator where available or one-fourth the width of the tire crown section from the crown center, including 24-hour inflation growth.     3. T.R.A. Classification and application.

Service	Vehicles	T.R.A. CODE
Loader and Dozer	Shovels Loaders Bulldozers	L-2
		L-3
		L-4
		L-5
		L-5S
Earthmover	Dump Trucks Coal haulers Scrapers	E-3
		E-4
		E-7
Grader	Graders	G-2
		G-3
Compactor	Tire-rollers	C-1
		C-2
Industrial	Mechinical handling Equipments	IND3
		IND4
		IND5

4. The different OTR tire familes   100 Series ( Narrow Base )
The H/S aspect ratio is approximately equal to 1.00
The section width, given in inches is a whole number
Example: 18.00R25 80 Series ( Wide Base )
The H/S aspect ratio is approximately equal to 0.80
The section width, given in inches is a whole number followed by a fraction
Example: 20.5R25= 525/80R25 65 Series (Low Profile Tires )
The H/S aspect ratio is appoximately equal to 0.65
The section width, given in millimeters followed by the number 65
Examplt: 750/65R25 
5. Fitting Guide  PLEASE CONSULT. Pictures   Patterns:  Tires' Sidewall Details: Tires in Stock: Loading: Tires' Work Conditions: