1 / 1
Model No. : | KSL-40 |
---|---|
Brand Name : | Kasole |
Color : | Other |
Product description
Product description:
KSL-40 Grouting Material is made of high strength material as aggregate, cement as binder,
supplemented by high flow state, micro-expansion, anti-segregation and other substances.
It adds a certain amount of water to the construction site. The Grouting Material can be used
after mixing evenly. Pvc Floor Planks,Pvc Floor Tiles,Pvc Floor Flange.
Application area:
1, need high precision installation of equipment, equipment foundation of primary grouting
and secondary grouting.
(2) Anchorage of steel bars and anchors in construction and geotechnical engineering.
Construction reinforcement and renovation project, Liang Zhu joint, deformation joint,
construction joint pouring.Road, bridge, tunnel, airport and other engineering emergency repair use.
5. Anchorage construction of railway sleeper.Epoxy Orange Peel Floor.
6, column wet clad steel reinforcement used for filling angle and column gap joint.Concrete Curing Agent.
Product features:
Grouting Materials Product characteristics:
1. The system of compensating shrinkage and gas expansion can compensate the shrinkage
and settlement of plastic slurry and ensure the close contact between grouting material and foundation.
2, no chloride-the formula does not use chlorides, thus avoiding the harm of chloride
3, free of iron-no stains due to rust or cracks due to expansion of rust
4, reliability-factory prepackaged material, which can eliminate the error caused by site mixing.Concrete
Sealing Curing Agent.Epoxy Flooring Kit.
Technical indicators: |
|
test item |
technical parameter |
Compressive strength for 1 day) |
≥15mpa |
(28 days) |
≥60mpa |
New wet density |
About 2150Kg/m3 |
Expansion time |
About 2 hours |
water permeability |
≤2mm |
Construction procedures:
1. The bottom plate must be clean, free of oil and other impurities, providing pressure relief
holes to ensure that all isolated places are ventilated
2. The cleaned foundation must be flooded with water a few hours before grouting. Remove
the free water and the water in the hole before pouring in
3, to achieve the required consistency, the amount of water must be accurate
4, stir until dispersed evenly, without caking,Antistatic Self-leveling Floor,Floor Coating Series.
5. After grouting is completed, all exposed areas should be maintained with curing agents or
wet sackcloth bags.
Send your inquiry to this supplier