Product description
Features:
- Good tensile strength and tear resistance
- Low out-gassing
- Wattage: 2.5, 5 or 10W/in
- Small, flexible radius
- Chemically resistant to many solvents and oils
- Comes with pressure sensitive adhesive backing
- 12V or 24V DC
- Multiple power heaters and profiled power
Basic information:
- Interior FEP binding stands 200°C
- Applied in vacuum environment
- Stand against most of chemical material such as acid, impregnated, alkali (except NaOH)
- Size: can be very small
- Thin and small curly semi-diameter
- Temperature range: -50-200°C, maximum temperature is 150°C for the heater with paster
- Materials: Kapton/FEP, polyimide membrane
- Resistance precision: ±10%ak±0.5Ω (taking maximum)
- Medium strength: 1,000V RMS
- Minimum curve semi-diameter: 0.8mm
Technical data:
- Insulation: UDC500V ≥200MΩ
- Dielectric strength: UAC≥2,000V
- Operating temperature: ≤232°C
- Power density: ≤1.1W/cm² or ≤6.5W/cm² (with thermostat)
- Thickness: ≤0.2mm can bent at any angle
- Weight: ≤278g/m²
Design instruction:
- Drawing for maximum installation size of the heater
- Relevant electric parameters: as power, voltage, resistance, current and tolerance
- Direction, length and location of the lead wire
Why Kapton?
- Heating for very small sizes
- Very thin
- High dielectric strength
- Flexible circuit design
- Superior tensile strength and tear resistance
- Resistant to radiation and most solvents
- Better choice for high watt density heaters (those over 5 watts/in)
- Also used for watt densities of 5 or less
- Good choice for heaters that require multi-zoned powers or heaters that have many holes and/or cutouts
- May provide an economic advantage for high volume applications
Good tensile strength and tear resistance
Low out-gassing
Wattage: 2.5, 5 or 10W/in
Small, flexible radius
Chemically resistant to many solvents and oils
Comes with pressure sensitive adhesive backing
12V or 24V DC
Multiple power heaters and profiled power
Interior FEP binding stands 200°C
Applied in vacuum environment
Stand against most of chemical material such as acid, impregnated, alkali (except NaOH)
Size: can be very small
Thin and small curly semi-diameter
Temperature range: -50-200°C, maximum temperature is 150°C for the heater with paster
Materials: Kapton/FEP, polyimide membrane
Resistance precision: ±10%ak±0.5Ω (taking maximum)
Medium strength: 1,000V RMS
Minimum curve semi-diameter: 0.8mm
Insulation: UDC500V ≥200MΩ
Dielectric strength: UAC≥2,000V
Operating temperature: ≤232°C
Power density: ≤1.1W/cm² or ≤6.5W/cm² (with thermostat)
Thickness: ≤0.2mm can bent at any angle
Weight: ≤278g/m²
Drawing for maximum installation size of the heater
Relevant electric parameters: as power, voltage, resistance, current and tolerance
Direction, length and location of the lead wire
Heating for very small sizes
Very thin
High dielectric strength
Flexible circuit design
Superior tensile strength and tear resistance
Resistant to radiation and most solvents
Better choice for high watt density heaters (those over 5 watts/in)
Also used for watt densities of 5 or less
Good choice for heaters that require multi-zoned powers or heaters that have many holes and/or cutouts
May provide an economic advantage for high volume applications