1 / 5
Brand Name : | AHD |
---|---|
Density : | 0.92g/cm3 |
Shenzhen, Guangdong, China
Product description
Product Description
Polypropylene,a high density,non-side chain and high crystallinity linear polymer,PP Rod and Sheet have excellent comprehensive properties.
PP rod is a semi-crystalline material. PP rod is harder and has a higher melting point than PE.
Performance of PP Rod
Anheda uses 100% new raw materials to produce high quality PP rod, PP rod has many good properties:high density,heat resistance,non-deformation,high rigidity,high surface strength,good chemical stability,excellent electric performance,Polypropylene rod is also non toxic,uniform in color,smooth surface,flatness,easy for installation and maintenance,long service life,easy processing and strong weldment.
Applications
Round PP rods are widely used,such as:
1.Spray carrier corrosion tank,bucket,
2.Acid and alkali industry,
3.Waste water,waste gas discharge equipment,
4.Washing tower,
5.Dust free room,
6.Semiconductor,
7.Electroplating process.
Physical Datasheet:
Item |
PP |
Color: |
Natural/Grey/White |
Proportion: |
0.92 g/cm³ |
Heat resistance (continuous): |
95℃ |
Heat resistance (short-term): |
120℃ |
Melting point: |
170℃ |
Glass transition temperature: |
_ |
Linear thermal expansion coefficient (average 23~100℃): |
150×10-6 m/(m.k) |
Flammability(UI94): |
HB |
(Dipping into water at 23℃: |
0.01 |
Breaking tensile strain: |
˃50 |
Tensile modulus of elasticity: |
1450MPa |
Compressive stress of normal strain-1%/2%: |
4/-MPa |
Friction coefficient: |
0.3 |
Rockwell hardness: |
70 |
Dielectric strength: |
˃40 |
Volume resistance: |
≥1016 Ω×cm |
Surface resistance: |
≥1016 Ω |
Relative dielectric constant-100HZ/1MHz: |
2.3/- |
Bonding capacity: |
0 |
Food contact: |
+ |
Acid resistance: |
+ |
Alkali resistance |
+ |
Carbonated water resistance: |
+ |
Aromatic compound resistance: |
- |
Ketone resistance: |
+ |
About Our Company
Anheda Plastic Group(AHD) was established in 1994 in the first special economic zone in Shenzhen, China. As the earliest manufacturer of engineering plastic semi-finished products, the group was founded with the mission of providing customers with the most competitive products. The Group has strong technical strength, introduces the most advanced imported equipment and the most advanced technology at home and abroad, and constantly innovates technology investment and efficient cost control. It has become the first domestic production and production with imported quality and the price is much lower than the equivalent quality. We always pursue excellent quality, constantly introduce advanced production equipment and production technology, control from the source, and use new raw materials (without adding any recycled materials) to produce high-quality products.
Related Products
The product range covers PA sheet, POM sheet & rod, ABS sheet & rod, PU sheet & rod, PP sheet & rod, PC sheet & rod, HDPE sheet & rod and other engineering plastic semi-finished products.We have been pursuing excellent quality, constantly introducing advanced production equipment and production technology, controlling from the source, using new raw materials to produce high quality products.
Shenzhen, Guangdong, China
Send your inquiry to this supplier