1 / 1
Model No. : | EC vibration test equipment |
---|---|
Brand Name : | HYDE vibration test equipment |
Product description
1 100% Air Cooled 2 SineForceRange:100 kgf (220 lbf) to 7,000 kgf (15,400 lbf) 3 Random Force to Sine Force Ratio 1:1 4 Shock Force: Twice the Sine Force 5 DisplacementPeak to Peak:25mm (1' ' ) or 40mm (1.6' ' ) or 51mm (2' ' ) 6 Lightweight, optimized armature 7 Rotating Trunnion with Pneumatic Isolation 8 Integral Payload Support 9 Efficient Double Field Coil Design 10 Low Magnetic Flux Leakage (MFL) 11 Uniform Magnetic Field 12 Remote cooling blower with silencer 13 Air-cooled State-of-the-art Switching Amplifiers(Optionally available in integrated combo-base with slip table assembly) |
Shaker ETT-6-230 | |||
Sine Force (Pk) | 6kN | Vertical Load Support | 300kg |
Random Force (RMS) | 6 kN | Body Suspension Natural Frequency (Thrust Axis)(Hz) | 3 Hz |
Shock Force (pk) | 12 kN | Table Diameter (mm) | 230 mm |
Usable Frequency (Hz) | 2-3500 Hz | Mass of Moving Element (kg) | 6 kg |
Maximum Displacement (mm) (peak-peak) | 51mm | Armature Insert Pattern (standard) | 17stainless steel M8 Inserts (UNC option) |
Maximum Velocity (m/s) | 1.8 m/s | stray Flux Density @6 inch (152mm) above table (mT) | <3 mT |
MaximumAcceleration (m/s2) | 1000 m/s2 | Overall Dimensions (L x D xH ) | 826*530*720mm |
Armature Resonance (Bare Table) (Hz) | 3300 Hz ± 5% | Weight of Shaker (Uncrated) (kg) | 590kg |
Power Amplifier YM-6 | Blower V-1000 | ||
Rated Output Capacity (kVA) | 6 kVA | Blower Power (Full Load) (380VAC,50Hz) (kW) | 4kW |
Signal to Noise Ratio (dB) | >65 dB | Air Flow (m3/s) | 0.33m3/s |
Amplifier Efficiency | >90% | Air Pressure (kPa) | 3.5 kPa |
Weight | 240 kg | Weight | 115 kg |
|
| Air Duct Length | 4 m |
Interlock Protections | Logic Fault, Over-Current, Input Phase Loss, Air Pressure, Over-Voltage, Over-Travel, Control Power, External Fault, Input Under-Voltage, Over-Temp (Field Coil and Driving Coil) | ||
System Environmental Requirements | System Options | ||
Room Temperature | 0-40°C | Slip Table | Head Expander |
Room Humidity | 0 to 90% , non condensing | Air Casters | Remote Control |
Power Supply Requirement | 380 VAc, 50Hz, 3Ph, 16kVa (Or customer specified power supply) | V-Groove Caster and Rail System | Pneumatic isolation |
Compressed air requirement | 0.6 Mpa | Fixture |
|
Send your inquiry to this supplier