Customized Size For High Density Polyethylene HDPE Sheet

Customized Size For High Density Polyethylene HDPE Sheet

Hdpe Polythene Sheet(HDPE), also known as low-pressure high-density polyethylene, is a semi-transparent film with high crystallinity and a certain degree of non-polarity. High Density Polyethylene Sheet Hdpe has excellent resistance to most household and industrial chemicals.

Characteristics:

500 Micron Hdpe Sheet has good heat resistance and cold resistance, good chemical stability, high rigidity and toughness, and good mechanical strength. Dielectric properties and environmental stress crack resistance are also good. It has good wear resistance, electrical insulation, toug hness and cold resistance, and has good chemical stability. It is insoluble in any organic solvent and resistant to corrosion by acids, alkalis and various salts at room temperature.

Areas of use

High-density polyethylene HDPE board can be used to make skateboards, ice hockey boards, cutting boards, cutting boards, seals, cutting boards, sliding profiles, tanks, guide rails, guide bars, earth car panels, dump truck panels and so on. Widely used in chemical, machinery, electric power, clothing, packaging, food, environmental protection, textile and other industries.

Hdpe 500 Sheet Size:

Size	Thickness	THICK Tolerance Range	Width Tolerance	Length Tolerance
1000×2000mm	1mm	1--1.1mm	1000--1008mm	2000--2010mm
	2mm	2--2.1mm
	3mm	3--3.1mm
	4mm	4--4.1mm
	5mm	5--5.1mm
	6mm	6--6.15mm
	8mm	8--8.15mm
	10mm	10--10.2mm
	12mm	12--12.2mm
	15mm	15--15.3mm
	20mm	20--20.4mm
	25mm	25--25.6mm
	30mm	30--30.8mm
	35mm	35--36.2mm
	40mm	40--41.5mm
	45mm	45.5--47mm
	50mm	50.5--52mm
	60mm	60.5--62.5mm
	70mm	70.5--72.5mm
	80mm	80.5--82.5mm
	90mm	90.5--93mm
	100mm	101--103.6mm
	120mm	121--124mm
	150mm	151--155mm
	200mm	202--207mm
1220*2440mm	1mm	1--1.1mm	1220--1228mm	2440--2450mm
	2mm	2--2.1mm
	3mm	3--3.1mm
	4mm	4--4.1mm
	5mm	5--5.1mm
	6mm	6--6.15mm
	8mm	8--8.15mm
	10mm	10--10.2mm
	12mm	12--12.2mm
	15mm	15--15.3mm
	20mm	20--20.4mm
	25mm	25--25.6mm
	30mm	30--30.8mm
	35mm	35--36.2mm
	40mm	40--41.5mm
	50mm	50.5--52mm
	60mm	60.5--62.5mm
	70mm	70.5--72.5mm
	80mm	80.5--82.5mm
	90mm	90.5--93mm
	100mm	101--103.6mm
	120mm	121--124mm
	150mm	151--155mm
	200mm	202--207mm

Hdpe 500 Sheet Physical Datesheet:

Item	HDPE sheet
Color:	white
Proportion:	0.96g/cm³
Heat resistance (continuous):	80℃
Heat resistance (short-term):	100
Melting point:	170℃
Glass transition temperature:	_
Linear thermal expansion coefficient (average 23~100℃):	155×10-6m/(m.k)
Flammability(UI94):	HB
(Dipping into water at 23℃:	0.0001
Bending tensile stress/ Tensile stress off shock:	30/-Mpa
Tensile modulus of elasticity:	900MPa
Compressive stress of normal strain-1%/2%:	3/-MPa
Friction coefficient:	0.3
Rockwell hardness:	62
Dielectric strength:	˃50
Volume resistance:	1015Ω×cm
Surface resistance:	1016Ω
Relative dielectric constant-100HZ/1MHz:	2.4/-
Bonding capacity:	0
Food contact:	+
Acid resistance:	+
Alkali resistance	+
Carbonated water resistance:	+
Aromatic compound resistance:	0
Ketone resistance:	+

Plastic Hdpe Sheet Photos:

Other colors of HDPE sheet  for choice:

AHD Plastic also provide other semi-finished engineering plastic (like below):

FAQ:

Q1: Are you a factory or trade company?

A1: we are a manufacturter for semi-finished engineering plastic sheet & rod like "

Polypropylene Plastic Sheet,Nylon Sheet，Pa6 Rod，Abs Plastic Sheet，Abs Plastic Sheet ，PP Rod and Sheet, POM Sheet, PC Sheet"etc since 1994.

Q2: Is your sample free?

A2:Yes, our samples are free, but the shipping cost is paid by the buyer.

Q3: What about the MOQ ? 

A3:In addition to the sample, the minimum order quantity for a regular size product is 100kgs.

Q4: What about the packing ?

A4:  As per factory's exported standard, usually use steel pallets.

Q5: What about the payment term ?

A5:we accept payment by L/C , T/T, usually 30% deposit is requested before production. 50% deposit is request for customzied items.

Q6: What's your delivery time?

A6:For samples: within 1-3 working days; For orders: within 7-30 working days.