1 / 1
Model No. : | KYDBL48150-1E |
---|---|
Brand Name : | Keya |
Task : | Program |
Jinan, Shandong, China
Product description
High current 48v 150a brushless dc controllers
I. Overview:
KYDBL48150-1E is an intelligent brushless DC controller. It adopts 32-bit high-performance MCU,Advanced motion control algorithm is suitable to the outside of the quadrature encoder input to complete the open loop and closed loop speed, under the closed loop torque of motor sport.Controller with multiple analog input port, the pulse input port and digital I/O port, can through the special software to redefine its functions.Universal RS232 serial port communication, CAN bus,CAN be widely used in automation.
III: Performance Index:
Power voltage: 16-65VDC.
Continuous working current 75A, transient current up to 150A 2s.
Out+5VDC power (It can power up the encoder): 5V DC 20mA (there series a diode, really voltage is 4.2V)l Analog input range: 0-- 5VDC.
Impulse input range: 500Hz—5000Hz (corresponding maximum speed)
[Note] The minimum impulse frequency may change along with the setting of maximum speed.
Input range of duty ratio 0-- 100% (input frequency range f ≤500Hz, recommend to use the frequency of 250Hz).
the digital output interface: 2 road, open drain, maximum load capacity of 24V 0.5A
Temperature protection status: When the temperature reach 65℃, the controller will reduce output by overheating protection and will stop output when the temperature reach 70℃.
Working temperature: -30℃-- +55℃
Ambient humidity: Relative humidity≤80RH
IV:General connect drawing
35PIN definition
|
1 |
CAN-L |
CAN-L end |
2 |
Encoder A- |
Incremental encoder A- |
|
3 |
Encoder Z+ |
Incremental encoder Z+ |
|
4 |
+5V |
5V out |
|
5 |
|
|
|
6 |
OUT1 |
Digital output 1 |
|
7 |
SPI-SET |
Magnetic encoder SPI-SET |
|
8 |
SPI-SIMO |
Magnetic encoder SPI-SIMO |
|
9 |
GND |
0V |
|
10 |
RX |
RS232-RX |
|
11 |
EN |
Enable |
|
12 |
F/R |
Reversing |
|
13 |
CAN-H |
CAN-H |
|
14 |
Encoder B+ |
Incremental encoder B+ |
|
15 |
Encoder Z- |
Incremental encoder Z- |
|
16 |
Hall W |
Hall signal W+ (HC) |
|
17 |
GND |
0V |
|
18 |
|
|
|
19 |
NC |
Vacant |
|
20 |
NC |
Vacant |
|
21 |
NC |
Vacant |
|
22 |
+5V |
5V out |
|
23 |
AIN |
Analog signal input (0-5V) |
|
24 |
Encoder A+ |
Incremental encoder A+ |
|
25 |
Encoder B- |
Incremental encoder B- |
|
26 |
Hall U |
Hall signal U+ (HA) |
|
27 |
Hall V |
Hall signal V+ (HB) |
|
28 |
OUT2 |
Digital output 2 |
|
29 |
GND |
0V |
|
30 |
+5V |
5V out |
|
31 |
GND |
0V |
|
32 |
TX |
RS232-TX |
|
33 |
+5V |
5 V out |
|
34 |
GND |
0V |
|
35 |
BRAKE |
Brake |
Jinan, Shandong, China
Send your inquiry to this supplier