Heat Transfer Powder Coating 

Heat Transfer Printing Wood Effect Powder Coating is the base coating .It can be widek\ly used in furniture ,metal door ,and any other metal products with big flat surface .It has a perfect performance ,effective decoration

Products of different gloss are available , namely , high gloss (above 80) , semi gloss(50-80) , flat gloss (20-50)and no gloss (below 20) . The gloss can be adjusted according to the customersdemand .

Density :1.4-1.7 g/cm3

Granularity distribution100 below 100(It can be adapted to the specific demand of coating)

Curing Condition
Depending on the types of different products . For detailed information , please check the instruction book attached to our products .

·              

·                      
Average coating rate

A.      Smooth Surface :
6-12/KG, film thickness 60μm (calculated according to 100 consuming of powder coating)

B.     Texture Surface :

5-7/KG ,film thickness is about 80-120μm

Package
The package of carton , the bag in the double-deck polyethylene of inside lining

Storage
The products should be stored in ventilated dry and clean room with the temperature below 30 . Not to be close to fire and heat and kept out direct sunlight . Outdoor stacking is prohibited . On the conditions mentioned above , the products can be stored stably for 6 months . The product beyond pot limit should be reexamined , and it can still be used if the inspection results past muster .
Avoid inbreathing dust when using the products though the powder coatings are nontoxic . The operations are suggested to wear protective glasses and respirators . Avoid long-term skin touch with the powder if possible .



Heat transfer is a sublimation process that a pattern printed on a film could be transferred into the powder coating under the effect of temperature. This process provides the aluminum decoration parts and metal furniture with a variety of effects such as wood grain, marble, granite and so on, and the result is so realistic that it is hard to tell what the material actually is.

The coating is flexible, so that the prefabricated steeled could be coated with this products before post-forming