Heat Pipe Vacuum Tube Solar Water Heater Bathroom Water Heating System

Heat Pipe Vacuum Tube Solar Water Heater Bathroom Water Heating System

Description:
High pressure and integrative
Tri-element vacuum tube with heat pipe
Outer tank: color steel plate/stainless steel SUS 304
Inner tank: stainless steel SUS 304
Use in any time: It adopts advanced design idea and integrates with high efficiency pre-heated patent technique, so it can warm the cold water rapidly when it flows through special pipe. it can overcome the demerit its of traditional SWH, such as slow heating, long waiting time.
More Capacity: We adopt special exchanging heat mode, it avoids mixed effect, so cold water can be heated at any moment
High hydraulic pressure: The hydraulic pressure is same as tap water, it is very suitable for tired person.
Easy operation: It can supply water automatically, you can take it easy and enjoy good time.
Economical and environment protecting: There is no pollution when it is working since it depends on sunshine, Green and economical
Fashionable: The appearance is fashionable and it can great integrate with your fitment.

Working  Principle:
Integrative pressurized solar water heaters are all-glass evacuated tube solar domestic water systems combined with heat pipes inside the glass tube. The selective coating on the inner tube converts solar energy into heat energy and transfers to the heat pipe by an aluminum fin.

The liquid in the heat pipe changes into vapor which rises to the condenser. The heat conducts the water inside the tank and the vapor becomes liquid, returning to the base of the heat pipe. This continuous circulation transfers heat from the heat pipe to the cold water in the tank as long as sun is heating the collectors. Hot water can be obtained by injecting cold water from the bottom of the tank.
 
Advantages:
Welding it by steel crystal integration   process, without welding joint, so no harm to health;
●No vent and less heat loss as compared to low pressure models;
●There is no water direct flowing into the tube,so the system can still operate in the event of occasional tube broken;
●Adapts intelligent controller instrument system to achieve complete automatic operation that guarantee the optimum performance;
●Multifunction: bathing, washing and domestic heating;
●Easy plug-in installation and anti-freezing,esp. suitable for cold area.

Technical Data:
Outer Diameter/Length of Tube:φ58mm/1800mm;φ47mm/1500mm
Heat Pipe:Red copper TU1+water;
                Transfer power:>=150W;
                Working pressure:4Mpa;
                Welding pressure:4Mpa
Evacuated Tube:Three-target tube;
                            High boron and silicon content 3.3;
                            Structure: Gradual change SS-AL-Nx/Cu selective absorption coating;
                            Vacuum degree: P<=5*10-4
Diameter of Outer/Inner Tank:470/360 mm
Material of Inner Tank:Stainless steel SUS304-2B; Thickness:1.2/1.5mm
Material of Outer Tank:Color steel, thickness:0.38mm;
                                     Stainless steel SUS304, thickness: 0.34/0.4mm
Insulation Layer:Polyurethane foaming , thickness:55mm
Structure of Tank:T/P Valve / magnesium rod / temperature sensor /
                             water inlet and outlet / electric heater hole
Working Pressure:0.6MPa
Frame / Bracket:Galvanized steel, 1.5mm thickness,45 degree
Heat Preservation:72 hours

Accessories:Electric heater:1500W-2000W/220V-230V;
                     Intelligent controller: SR609(esp. for integrative pressurized type);
                     P/T valve (pressure & temperature): WAY-20,0.7MPa;
                     Magnesium rod:diameter 20mm, length 23 cm, copper connector;
                     Temperature sensor.