1 / 1
Model No. : | 1.0mm |
---|---|
Brand Name : | OEM |
Material : | HDPE |
Product description
Introduction
HDPE geomembrane 1.0mm HDPE waterproof Geomembrane HDPE Pond liner Geomembrane Pond liner
thickness 1.0mm Density ≥0.940g/cc
yield strength ≥13kn/m break strength ≥20kn/m
yield elongation ≥11% break elongation ≥600%
Tear resisitance ≥115n Puncture Resistance ≥240n
HDPE geomembrane is produced with high density polyethylene resins by a method of three layer co-extrusion model. The raw material is processed at 200°C by fusing and coextrusion, whose basic properties are kept during the producing process. It can be widely used in areas of garbage burying, waste disposal, tail minerals storage and underground construction projects.
Application
a) Prevent leakage disposal in waste burying field or waste water or waste dregs disposing field;
b) River bank, lake dam, mine remaining, reservoir, tunnel, liquid storage pool;
c) Preventing leakage in subway, basement, and tunnel;
d) The plane direction laying of dam, the vertical direction laying ground till, used in the construction
fence and waste material field;
e) Used in seawater or freshwater feed field;
f) Used in ground till of road, highway, railway and waterproof layer of swelling clay and wet collapsed loess;
g) Preventing leakage on rooftop
Technical Data Sheet
Spec Properties |
GM0.3 |
GM0.5 |
GM0.75 |
GM1.0 |
GM1.5 |
GM2.0 |
GM2.5 |
Thickness |
0.30mm |
0.50mm |
0.75mm |
1.00mm |
1.50mm |
2.00mm |
2.50mm |
Density ( ≥) |
0.940g/cc |
0.940g/cc |
0.940g/cc |
0.940g/cc |
0.940g/cc |
0.940g/cc |
0.940g/cc |
Tensile Properties ( ≥) • yield strength • break strength • yield elongation • break elongation |
4.2 kN/m 6kN/m - 600% |
7 kN/m 10kN/m - 600% |
10 kN/m 15kN/m - 600% |
13 kN/m 20 kN/m 11% 600% |
20 kN/m 30 kN/m 11% 600% |
26 kN/m 40 kN/m 11% 600% |
33kN/m 50kN/m 11% 600% |
Tear Resistance ( ≥) |
34 N |
56 N |
84 N |
115 N |
170 N |
225 N |
280 N |
Puncture Resistance ( ≥) |
72 N |
120 N |
180 N |
240 N |
360 N |
480 N |
600 N |
Carbon Black Content ( ≥) |
2.0-3.0% |
2.0-3.0% |
2.0-3.0% |
2.0-3.0% |
2.0-3.0% |
2.0-3.0% |
2.0-3.0% |
Carbon Black Dispersion ( ≥) |
Note(1) |
Note(1) |
Note(1) |
Note(1) |
Note(1) |
Note(1) |
Note(1) |
Oxidative Induction Time(OIT) Standard OIT ( ≥) |
60 min. |
60 min. |
60 min. |
60 min. |
60 min. |
60 min. |
60 min. |
Note(1): Carbon black dispersion (only near spherical agglomerates) for 10 different views:
9 in Categories 1 or 2 and 1 in Category 3
Factory
Send your inquiry to this supplier