GT-L2 Hydraulic Quick Release Coupling/Hydraulic Coupler

Specifications Quick release coupling, cost-effective, OEM service available

GT-L2 Quick Release Coupling     GT-LB Series Couplings are connect under pressure, non-spill, quick couplings where both halves are brought together in a threaded connection with either a wing nut or hex nut sleeve. The flush valves keep air inclusion and spillage to a minimum while the bonded valve seal allows full pressure connect and disconnect without seal washout. Coupling bodies are brass and the sleeves are steel. Optional flange is available for bulkhead mounting.   Available in body sizes 3/4" through 1-1/2" with female pipe thread (NPT) as the standard end configuration.     Feature: 1. Heavy-dust wing-type nut is ruggedly built. It can withstand the hammer blows caused by tighten or loosen the coupler. 2. Assembled valve seal permits the coupling connect or disconnect at full pressure while the seal will not washout. 3. The flush face valve keeps air and spillage to a minimum. 4. Corrosion resistant brass material make the coupling be compatible with a wide range of media. 5. Compatible with PARKER 6100 Series, FASTER FB Series, AEROQUIP 5100 Series and HANSEN 96 Series.    

Specifications
Part No.	ISO	Thread			Size (inch)	Rated Pressure(Mpa)	Rated Flow (L/min)	Temperature Range (°C)
						BRASS
GT-L2-08-SP	DN25	ZG1	G1/4	NPTF1/4	1	20.7	189	NBR :-20~100
GT-L2-10-SP	DN31.5	ZG1-1/4	G1-1/4	NPTF1-1/4	1-1/4	20.7	189