Specifications Repair mortar, spraying motar/concrete

  GSK04 mortar pump for thin spray coating, Fireproof coating,Fill the mortar. 450L/h    Structure and feature   This pump is new structure, avoide difficult when grouting thick concrete. Easy to operate, high efficiency.  This machine is mainly compose by motor reducer, t Transport slurry body, supercharge  screw, supercharge   stator, manometry, hopper, electric control system, etc., when used in the spray guard, also includes the injector, which is characterized as follows:     1. the structure is compact and simple, high reliability, the use of imported electrical appliances.   2. easy to operate and maintain.   3. light weight, wheel design, easy to move.   4. can be the grouting liquid water-cement ratio range, especially suitable for the high concentration of the design requirements of a thick paste.   5. continuous filling, to avoid excessively large instantaneous pulsating pressure of the piston pump.   6.  passively Boost. When the slurry is filled, the pressure is gradually increased, easy to control and maintain the grouting pressure.   7, When the grouting pressure reaches the design pressure, reversal relief.   8, When use with the air compressor and injectors, can do interior and exterior underlying overlay layer spray guard.   Application   The machine can be widely used in thin mortar ,mud, concrete. coating and spraying. fireproof coating, fill the mortar, repair the mortar   GSK04 mortar pump/Spraying pump  

Item			Unit	Specification
slurry output			L/H	450
Power			kW	1.5
Sand size			mm	≤1
water cement ratio				≥0.30
Grout pressure			MPa	1.0-3.0
Distance	Vertical		m	30(concrete mortar) 50(cement paste,grout)
	horizontal		m	180
bucket capacity			L	30
Weight of machine			kg	110
Dimension l*w*j			mm	430*460*1460
Spraying		Air compressor Pressure	Mpa	0.3-0.6
		Air Consumption	M3/min	≥0.6