Product Description Good quality galvanized welded wire mesh making machine with high quality Technical Parameters of reinforcing wire mesh welding machine
Items | Description | Detailed |
1 | Type | DNW-CNC2500-Q/P |
2 | Welding Speed | 45-60Times/Min. |
3 | Mesh Width Range | 1000mm-2500mm (It can be adjusted) |
4 | Mesh Length Range | 3000mm-6000mm (It can be adjusted) |
5 | Cross Wire Spacing | ≥50mm (It can be adjusted) |
6 | Line Wire Spacing | ≥100mm (It can be adjusted) |
7 | Cross Wire Diameter | 5-12mm |
8 | Line Wire Diameter | 5-12mm |
9 | Max. welding Range | 12mm+12mm |
10 | The Number of Welding Spot | 26 pcs |
11 | Welding Material | Low Carbon Cold Drawing Wire, Galvanized wire, Cold rolled ribbed. Smooth surface, no rust, no stone drawing agent, a smoke-free marks, free from water stains, no spots scar. |
12 | Crosswire Feeding Method | Pre-cut |
13 | Line wire Feeding Method | Pre-cut |
14 | Operation Control Method | PLC Programming Control |
15 | Rated power | 125KVA*13 (Water Cooling) |
16 | The Allowed Fluctuation Range for Power | ±10% |
17 | Supply Voltage | 380V |
18 | Current frequency | 50HZ |
20 | The Machine Size | L6000mm*W3250mm*H2300mm |
PICTURES OF EACH PART FOR WHOLE PRODUCTION LINE AS FOLLOWING: LINE WIRE FEEDING CAR We have our own patent right for the line wire feeding car.It is controlled by step motor.This can save the feeding time and imporves the production efficiency. CROSS WIRE AUTO FALLING PART The cross wire fall automatically from the hopper to the middle of the upper and lower electrodes.The hopper is controled by the step motor,which makes the wires fall more accurately and fast.With the adding raw material device,max loading wires 1-1.2T.Especially when you often make more than 8mm wire,it's more convenient to add it.
WELDING PART 1. Spatter is small, and alleviate the burn of welding joints.
2. The device equiped with the red cooper,making the welding pressure is uniform, and the mesh panel solid and stable.
3.The material of the down electric pole base is the chrome ,zirconium an copper,has good electrical conductivity and abrasion-proof,with a long service life.
4.The water cooled tube equiped with the upper and lower contact,cooling the contact,protect them very well.
5.The inverter is water cooled,it is better for the service life of inverter.
ELECTRIC CONTROL CABINET 1. PLC control,with the humanized operation interface, easy to operate and master. 2. The adjustment of mesh specifications uses the touch screen, it is very easy to set the welding parameters and production data. 3. The touch screen can be of in English. 4. The mesh size can be adjusted to meet the different needs of users. 5. PLC uses the Mistubishi of Japan.
MESH DRAWING PART 1.Mesh traction device is equipped with step motor control , improve the accuracy of the mesh
effectively.
2.Using the gear and the rack drive, the transmission efficiency is perfect.
3. Mesh can vary to meet the production of a variety of needs.
4.Both ends of the traction device is equipped with limit switches, prevent traction car from crashing and also mechanical damage from collision.
Wire Straightening and Cutting Machine(Auxiliary Machine) and Reinforced Mesh
OUR FACTORY
After- sales service 1. Guarantee time: one year since machine was at buyer's factory but within 18 months against B/L date.
2. Within guarantee time, if any components are broken under normal condition, we can change for free.
3. We can send our best technician to buyer's factory for installation, debugging and training.
4. Complete installation instructions, circuit diagram, manual operations and machine layout.
5. Timely reply for your machine questions, 24 hours support service. ♣Company profile We are professional manufacturer for making Mesh weaving machine,Mesh welding machine and Mesh punching machine. We have passed ISO 9001:2008,CE and SGS certificate.
Our factory covers a total area of 67,000 sqm. Warmly welcome to China to visit our big factory!Expecting to work together with you!