good helper RoHS approved antacid araldite epoxy adhesive for Plastic

good helper RoHS approved antacid araldite epoxy adhesive for Plastic   Product Description     What to bond: High performance epoxy adhesive is the adhesive for households and industries. Suitable for repairs and welds. Makes superior bond strength. Bonds to all metal, plastic, rubber, wood, ceramic, glass and concrete. Resistant to acid, alkali, oil, solvent and chemicals. Non-flammable, non-shrinking and waterproof. Makes metallic grey finish. Can be filled, grinded and drilled.   Application: 1. Surface to be repaired should be clean, dry and free of oil. 2. Pierce ends of tubes using cap. Squeeze equal amount of hardener and resin from each tube and mix thoroughly until a uniform color is achieved. Mix only what you can use immediately. 3. Apply to surface to be repaired. Remove excess epoxy. 4. Sets in 3-5 minutes.   Directions: 1.   Adequate local exhaust ventilation is required and the product must be kept off children. 2.  Wear leather glove while operating. In the event of its touch of skin or eyes, flush with fresh water or see a physician. 3. Store in dry, shaded, and ventilated condition away from the sources of heat and ignition. 4. In the event of mass use, make a pre-test to avoid the negative effect of mass operation.   Storage and packing: 1. Store on shady and cool place. The shelf life is one year. It is available to reuse based on passing of the test if being beyond the shelf life. 2. Preserve and transport as non-dangerous product.   Execution criterion: JC887-2001 Guarantee period: 12 months Gross weight: 56.7g/set     Pictures show    Product:     Product showcase of  good helper RoHS approved antacid araldite epoxy adhesive for Plastic :     Packing         Company Information       Production Line         Certifications       Contact us     Thank you for visiting good helper RoHS approved antacid araldite epoxy adhesive for Plastic.Any questions,please feel free to contact us. I am Ruiqiang Wu here.