Gold Concentrator Table Shaking table for gold concentration

Gold Concentrator Table with ISO and CE certificates Shaking table for gold concentration    ISO Certificate  Gold Concentrator Table :   Shaking table is a mine selecting machine for fine materials working by gravity. It is widely used in selection of Tin, tungsten, gold, silver, lead, zinc, tantalum, niobium, iron, manganese, ferrotitanium and coal.   Gold Concentrator Table is applicable for separations of fine-grained and micro-grained rare metal, ferrous and non-ferrous metal, precious metal , coal and other minerals.
It can carry out ore concentration operation independently and also can operate in conjunction with jig, screw separator, centrifugal separator and other equipment.       Gold Concentrator Table is one of spiral separating equipments,which is easy to operate and maintain   It is one of the main gravitational segregation equipment in the enrichment plant, widely applies in the classification tungsten, the tin, the tantalum niobium and other rare metals and the noble metal ore. Also available in classification iron, manganese ore and coal. When ore and so on processing tungsten, tin, the table effective recycling granularity scope is 2-0.22 millimeters. The table dressing process carries on the complex inclined bed surface , and the ore grains are sent in from the bed surface for the ore trough, simultaneously it supplies crosswise wash for the water trough, thus the ore grains laminate surface and according to the proportion and granularity, and make the longitudinal motion and transversal motion along the bed surface, in function of the gravity, the crosswise running water momentum, and the inertia and friction force from the reciprocation symmetry movement of bed surface. Therefore, the proportion and the granularity different ore grain assumes gradually along respective heading by A on the one hand to B on the other hand fan-shaped flows off, separately discharges from the ore concentrate end and the debris side different area, finally is divided into the ore concentrate, the middling and the debris.       gold concentration shaking table feature
The 6-S Gold Concentrator Table has the below merits: the high-grade ore scaled, the classification efficiency high, safeguards easily, and advantageous for the adjustment stroke. When change cross fall and stroke still might maintain the surface of bed movement balance; the spring lays aside in box in vivo; the structure is compact, also it could obtain the final ore concentrate and the final debris onetime.         Gold Concentrator Table Working principle:    Shaking Table is to make separations based on the difference of specific gravity of feed materials, reciprocating asymmetrical movement and the stratification performance of the inclined table surface in the lateral water flow with obvious zone of the minerals with different specific gravities on the table, high quality of concentrates produced, convenient operation and adjustment and other features.
Glass steel shaking tables are effective gravity separation equipment which can be used for different operation such as rough selection, elaborate selection and scavenging for large, medium and small-sized factories and applies to the sorting of nonferrous metal, ferrous metal, rare and precious metal, gold and nonmetallic ores of fine grains. Such shaking tables are divided into ore sand tables and ore slime tables. Ore sand tables apply to the sorting of coarse ores and ore slime tables apply to the sorting of fine ores.   Shaking gold Concentrator table Technical Specification:            Shaking gold Concentrator table Structure:   This machine is composed of three parts: head of shaking  table, surface of shaking table, as well as bearing and adjusting gradient.     1. Head of shaking table: This is eccentric connecting-rod type  mechanism. The motor drives the eccentric shafts to rotate and the connecting  rod to move up and down. When the connecting rod pushes down the toggle plate  compression spring, the pull rod drives the table surface to move in the  direction of table head. When the connecting rod pushes it upward, it, through the spring tension, drives the table surface to move in the opposite direction. When they are linked, the rotating motion of eccentric shaft is changed into  horizontal alternating differential motion of table surface.   2. shaker table for gold Table surface: It is mainly composed of vibrating roof, steel  skeleton, glass fiber reinforced plastics and wear-proof surface, feed water  tank, feed chute, and draw bar. The table surface adopts steel skeleton FRP composite structure. That is, glass fiber reinforced plastics are pasted on steel skeleton to form a solid glassfiber reinforced plastic surface. Its above  uses abrasion-proof materials to make surface and riffle (notch groove).  
3. Bearing and Adjusting Gradient Mechanism
shaker table for gold The bearing and adjusting gradient mechanism is mainly composed of shaking support plate, adjusting seat board, saddle seat, and adjusting screw  rod. The shaking support plate enables the table surface to make arc forward  and backward alternating movement on vertical plane. The shaking support plate  and shaking box are fixed on the adjusting seat board with gripping channel  steel. When hand wheel regulating screw rod is used to get the adjusting seat  board to rotate on the saddle seat, the Transverse gradient of table surface  can be adjusted.     Pictures Of Shaking Table In Our Workshop:           Mineral Processing Spiral Chute Other Related Information:   1. Packing: Container or negociation. The products should be processed to be rustproof and moisture proof before delivery.Small spare parts will be packed in one wooden crate. 2. Time of delivery: 30 working days after the receipt of deposit. 3.Term of Payment: T/T 30% payment in advance as earnest money, T/T the rest 70% payment before shipment. 4. Port of Loading: China port(Qingdao,Tianjin, negociation). 5. Installation: Send the engineer to guide to install and debug the machines, the buyer should prepare the materials needed. 6. Warranty: The seller guarantee quality of the machines for a period of one year from the date of trial run finish, but not to exceed 20 months from date on arrival at the port of destination. If any parts (excluding easily damaging parts) are found defective in quality in the first year, the seller should replace free-of-cost. After one year, parts can be replaced on favorable payment basis.      Henan Good Heavy Machinery Manufacture Co., Ltd. is a professional manufacturer and provider and full solution of mining machinery for various ore dressing, sand and stone crushing plant, rotary kiln, dryer, autoclaved aerated concrete production line etc. We have more than twenty years’experience in the field of machinery manufacturing.   Our machinery has been exported to Myanmar, Vietnam, Laos, southeast Asia, Tajikistan, Kyrgyzstan etc. Welcome to visite our company !