Specifications Microfiltration membrane :
1.V shape pore
2.In side- out
3.50000dalton
4.Cross flow
German quality ps microfiltration membrane has higher flux longer life time more stable operation for chemical wastewater treatment Product Description Tripure V-shape UF membrane owns a unique pore structure, having a reliable performance and good flux recovery. It is produced by cooperation with Berghof of Germany at Germany technology and strict quality control. It has an obvious advantages on wastewater treatment and more promising properties on water purification of power station and steel factory,proved by many partners in USA, EU, Japan, Mid-east, South Asia and China.
Advantages of V-shape UF membrane: -High Strength Tripure V-shape UF membrane is made of long chain hydrophilic material modified PS with special technology and strict quality control standards, owning excellent anti-explosive and stretching characteristics. The explosive pressure reaches up to 10 bar. -Higher fulx & stable operation Tripure V-shape UF membrane owns a unique pore structure with lower membrane resistance. Flux recovery is 20%-30% higher than similar products, due to its long molecular material. -Anti-fouling & anti-oxidant It has an obvious advantage on cleaning and flux recovery, due to the special technology.
Product Description:
Membrane Material | Modified Polysulfone(PS) |
Membrane Configuration | ultrafiltration |
Normalized Filtration Pore Size | 0.01 μm |
MWCO(Dalton) | 50,000 |
Potting Material | Epoxy |
Housing Material | UPVC/ABS |
Preservative | Glycerin |
Application Data:
Typical Filtrate Flux | 50~120 L/m2·h (85~204 GFD) |
Filtration type | Cross flow |
Maximum Applied Feed Pressure | 0.5MPa (73 psi) |
Maximum TMP | 0.2 5MPa (36 psi) |
Maximum Backwash Pressure | 0.1-0.15MPa (30 psi) |
CIP NaCIO Concentrate | 500 ppm |
Chlorine Tolerance | 250,000 |
Maximum Feed NTU | 5 NTU |
Maximum Feed SS | 20ppm |
Operating Temperature | 5~50°C (41~113°F) |
Operating pH Range | 2~12 |
Operation Mode | Dead-end or cross-flow. |
Typical process conditions:
Backwash Flux | 170~250 L/m2·h (119~255 GFD) |
Backwash Duration | 30 seconds |
Backwash Frequency | 30~120 minutes |
CEB Frequency | 2-6month one time |
CEB Duration | 2~20 minutes |
Cleaning Chemicals | NaClO or H2O2, NaOH, HCl, citric acid or oxalic acid |
Module specificaiton:
MODEL | MEMBRANE ID(mm) | MEMBRANE MODULE ID(inch) | MEMBRANE MODULE LENGTH(mm) | MEMBRANE AREA(m2) |
4P-0.9V | 0.9 | 4 | 1170 | 4.5 |
6P-0.9V | 0.9 | 6 | 1081 | 15 |
8P-0.9V | 0.9 | 8 | 1302 | 30.1 |
8P-0.9V-XL | 0.9 | 8 | 1780 | 41.5 |
10P-0.9V-XL | 0.9 | 10 | 1806 | 60.2 |
10P-0.9V-XL70 | 0.9 | 10 | 2106 | 70 |
Application: -Ground water&mine water -Surface water -Boiler feed water -Sea water desalination pretreatment -Textile wastewater -Municipal wastewater
References:
Location | Scale(m3/d) | Cases |
Thailand TYY | 2000 | Drinking Water Pretreatment |
Angola | 3000 | Drinking water pretreatment |
Equatorial Guniea | 1500 | Drinking water pretreatment |
Israel | 1200 | Drinking water pretreatment |
Nei Monggol , China | 40800 | Underground water |
Shenjiao mine, Shanxi ,China | 1000 | Mine water reuse |
Hongxin Coal, Shanxi, China | 600 | Boiler water |
Packaging & Shipping Packing Size of each module
MODEL | GW. (kg) | PACKING SIZE (mm) |
4P-0.9V | 2.5 | 1200*130*150 |
6P-0.9V | 20 | 1050*250*250 |
8P-0.9V | 27 | 1350*360*320 |
8P-0.9V-XL | 33 | 1860*360*320 |
10P-0.9V-XL | 52 | 1920*470*410 |
10P-0.9V-XL70 | 58 | 2430*470*410 |
By air, the UF modules will packaged with standard carton+plate By sea, the UF modules will be packaged in wooden case Our Services Tri-High Technical/technological support: -Bench-scale and pilot testing -Process design -Service and maintenance training -System trouble shooting -Technology Support(start-up and operation) -Module fouling analysis and cleaning Tri-High tenets: High quality of products and service High efficiency of our work High value created to customers Company Information Tri-High is a professional manufacturer of water treatment products of top quality, founded in 2003 by Dr. Zhang Baocheng. Who is graduated from Politecnico Of Torino of Italy and has been working on UF membrane research and manufacturing since 1989.
Tri-High has varies water treatment products, such as UF membrane, Water purifier, RO housings, Filter media of natural BIRM, anthracite, etc.
Tri-High's core products are UF membranes cooperated with Berghof of Germany. The unique PS capillary UF membrane of 50,000-dalton with V shape pore structure has outstanding properties on strength, flux, antifouling and stability. It has an excellent performance on common water treatment, and obvious advantages in industrial waste water field.
Tri-high products have been widely used in the USA, Europe, Japan, Thailand, Mexico, Korea, the Middle East, South Asia, Australia, etc. for hundreds of reference through our distributor and partner networks in those countries, especially for industrial waste water reuse.
We pursue long-term and stable cooperative relationships with our distributors and partners by continuous improvement of quality and service. We look for more partners and distributors for common development by taking advantages of both sides. You can tell us the raw water quality, capacity, treated water(permeate water) quality/usage, we will choose the suitable module for you. FAQ Please confirm the follow information to offer you suitable proposal: 1. raw water quality(or raw water type and main pollutant) 2. capacity(m3/h or L/h) 3. requirements of the treated water(quality or usage) 4. do you need UF membrane or the complete system