Galvanized Gabion Retaining Wall

Galvanized Gabion Retaining Wall

Gabion retaining walls provide stability and resist the disturbing forces. Gabion retaining walls are considered to be a flexible and free draining system. The design procedures for gabion walling follows the design criteria of BS8002 ? ?The Code of Conduct for Earth Retaining Structures?. When designing mass of gravity retaining walls, design checks must be carried out at each course level to ensure that the stability criteria is achieved throughout the structure. It is normal to incline the walls from the vertical by 6 or 10 degrees for aesthetic and stability reasons. 

The degree of inclination is a maximum of 6 degrees for the Gabion 39 System and 10 degrees for the Gabion 27 System. The walls can either be stepped or flushed face. The degree of flexibility of a gabion retaining wall is dependent upon the type of fill, quality of filling, mesh type and wire diameter of the mesh.

Typically, the more angular the fill, the greater care in filling and heavier the wire diameter of the mesh and the higher the quality of installation. This results in a more dimensionally stable structure. The Gabion 27 System is the preferred type of products for these structures. For mass of gravity retaining walls along water courses when flexibility is required, the preferable gabion type is  manufactured from double twisted woven hexagonal mesh.

Hexagonal gabion basket retaining wall

1.Material:Hot dip galvanized,pvc,galfan;

2.Tensile strength:350-550N/MM2

3.Standard: ASTM856-98;ASTM A975-97;EN-10244ECT;

4.Mesh size:6cm*8cm;8cm*10cm,10cm*12cm,12cm*15cm;

Nominal Dimensions			Number of Coils	Capacity(m³)	Tolerance
Length(m)	Width(m)	Height(m)			length: +/-3%   width: +/-5%   height: +/-5%
2.0	1.0	0.15-0.3	1	0.3-0.6
3.0	1.0	0.15-0.3	2	0.45-0.9
4.0	1.0	0.15-0.3	3	0.6-1.2
2.0	1.0	0.5	1	1.0
3.0	1.0	0.5	2	1.5
4.0	1.0	0.5	3	2.0
1.0	1.0	1.0	0	1.0
1.5	1.0	1.0	0	1.5
2.0	1.0	1.0	1	2.0
3.0	1.0	1.0	2	3.0
4.0	1.0	1.0	3	4.0
Binding Wire: sufficient wire is supplied for lacing and bracing operations.
All sizes and dimensions are nominal.

Gabion Basket

Welded gabion basket retaining wall

1.Material:Q195 iron wire;

2.Mesh:50*50mm,100*100mm,100*50mm;

3.Wire thickness:3mm-5mm;

4.Surface treatment:galvanzied and galfan;

Gabion Box
Specification(m)	partitions	Capacity ( m 3)
0.5 x 0.5 x 0.5	0	0.125
1 x 0.5 x 0.5	0	0.25
1 x 1 x 0.5	0	0.5
1 x 1 x 1	0	1
1.5 x 0.5 x 0.5	0	0.325
1.5 x 1 x 0.5	0	0.75
1.5 x 1 x 1	0	1.5
2 x 0.5 x 0.5	1	0.5
2 x 1 x 0.5	1	1
2 x 1 x 1	1	2
Sets of gabion steps 1m to 2m wide

Gabion Basket

Anping Bochuan Group has three branch factories:

 1.Factory to produce galvanzied wire,black annealed wire and nail;

2.Factory to produce gabion;

3.Factory to produce welded mesh and mesh fence;

4.Factory to produce barbed wire and concertina wire;

Factory Picture

Besides we have also two sales office