Galvanized double layer roof panel machine
If you want to save space and cost,double layer roll forming machine is your best opition.One machine can make two design,but shortage it that they can not run at same time.Cause they share one motor and one guillotine.
A double layer roll forming machine has two layers or two levels of roll forming parts which gives it another name dual level roll forming machine, and because this machine makes two metal sheets.IBR and corrugated double layer roll forming machine used a lot in Africa.
1.Main parameters of double layer mahcine :
Parameters of raw material
Material
|
Thickness
|
I.D
|
Yield Strength
|
Q235
gi&ppgi& galvalume
|
0.25-0.7mm
|
508mm
|
<=235mpa
|
Decoiling → Roll Forming →Hydraulic cutting→Collecting table
2.Photos of Machine:
3.Technology parameters:
The weight of machine is about3.1tons.The total dimension of machine:6800(L)*1200(W)*1500mm(H)
3.1Manual decoiler:
Capacity of uncoiler:5tons
Expansion of segment:Manual
Rotation of segment:Manual
Number of segment:4
Range of segment expansion:480-520mm
Operation method:Manual
Qty: 1
3.2 Guiding system:
To keep the material straight
Entrance and adjustable wheel: 2rolls
Qty: 1
3.3Main forming machine:
Coil thickness:0.25-0.7mm
motor type: 3 phase asynchronous motor
Main motor power:4kw+3kw(normal speed),
Approx.13groups roller including
Roller : S45C with quenching treatment,Shafts of rollers are tooled by grinding machine for two times to ensure the precision of final product.
Shaft:Diameter of max shaft: ø70mm(hardening and tempering)
Transmission type:by one inch chain
Qty: 1
3.4 Hydraulic cutting:
Material of blade: Cr12Mov,HRC58-62
Length measuring: Automatic encoder length measuring
Type of cutting:Cutting after forming:Cut the sheet after roll forming to required length.No need to change mold for different sizes
Cutting motion:The main machine automatically stops and the cutting will take place.After the cutting,the main machine will automatically start.
Power of motor:3kw
3.5 Product support frame
Size: L 3m x W0.5m