flow water turbine

Specifications widely use

simple structure

small size

low cost

high efficiency

specifications:                       ISO9001-2008                 SGS&BV&TUV certificated                 competitive price& good quality                  customized design  Francis turbine   francis turbine is a reaction turbine and the most common water turbine in use today. It's of simple structure, small size, low cost and high efficiency. They operate in a head range from 10m to 700m with runner diameter from 0.35 to 4m, and specific speed 50-300rpm. Currently the largest capacity of our single Francis turbine unit is 6000kw. Pelton turbine pelton turbine is one kind of impulse turbines, used for high-head (50-1300m)power plants. Our company has streamlined  the contraction of the nozzle:the energy can flow efficiently into kinetic energy of high-speed jet. While the turbine changes in the load , the water inlet speed and direction keep the same . Pelton turbine changes in a relatively small head, speed, efficiency and therefore the efficiency  can excess 91%. Turgo  turbine One of the impulse type, applicable water head:(40-300M). The center line of jet flow with gyration plane of runner is angled 22.5;The runner is heavily  pushed by water from pressure pipe that is switched to high speed jet flow through spray nozzle. The runner works  by water flow entering one side of vane and coming out from its other side, It can reliably operate with simple structure,easy inspection and maintenance. Axial flow turbine  Applicable water head:H=(2-40m).Kaplan turbine has two types, fixed blade propeller and kaplan turbine.The fixed blade type is with fixed runner,generally used for the small load  and water changeing; The Kaplan type is with adjustable runner by the oilpressure equipment to adapt to the load and water head changing to get the higher average efficiency of some of the Kaplan type turbine is higher than 94%. Turbine generator: AC Synchronous turbine generator, frequency applicable: 50hz and 60hz, with unit capacity from 50kw-20mw. The generator is equipped by brushless or static excitation system and automatic voltage regulator device with ±5% voltage regulation range. The winding of generator is made of qualified copper, and shaft is made of forged steel.