Flexible Graphite Stainless Steel Spiral Wound Gasket

Specifications Spiral Wound Gasket

1.UL,FDA,ROSH or REACH approved

2.TS16949/ISO9001

3.Size:1/2"~100"

Flexible Graphite Stainless Steel Spiral Wound Gasket      kind of gasket  1.A. spiral wound gasket consists of four types:basic type,with  inner ring,with outer ring,and with inner and outer rings.   B. heat exchanger spiral wound gasket :basic type and with inner and outer rings 2.Normally material used: A. Steel tape :08F ocr13,ocr18Ni9Ti.1Cr18Ni9Ti(321).ocr17Ni12,M02(316),and 0Cr17Ni14M02(316L) B.(Cold roll)steel plate for inner and outer ring: Outer ring "mild  steel ,ocr13 and OCr18Ni9 Inner ring: same as steel ,special order is available through negotiation. C.Normetal tape: flexible graphite, special made asbestos ,Teflon and non-asbestos paper.   Scope of Application  1.Working  temperature:-196~700(Not  higher than 600   in oxidic  medium) 2.Working  pressure:<=25MPa 3.Gasket  coefficient’s=2.5~4 4.Min.pre-tightening   specific   pressure’s=68MPa    Welcome to contact me if you have any questions. Thanks!