famous 4 gallon bucket 20L HDPE/PP making machine

Specifications 4 gallon bucket 20L HDPE/PP making machine

European clamping system

Japanese YUKEN valves

energy-saving

MOOG-100 parison

4 gallon bucket 20L HDPE/PP making machine Specifications Our machine is double station with  automatically  deflashing. The output of it is very big .The machine is a full automatic   4 gallon bucket 20L HDPE/PP making machine  ,   4 gallon bucket 20L HDPE/PP making machine   was specially designed for making plastic water bottles, lubricant oil bottles, detergent bottles ,cosmetic bottles, and other plastic containers not over 25L. A.Brief Introduction
4 gallon bucket 20L HDPE/PP making machine   are   high yield .    It can also blow bottles in shapes: carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET and PP etc. 
1).High Automatization
2).High Intelligence: 4 gallon bucket 20L HDPE/PP making machine  can be controlled through touch screen and running status is shown on it.
3).High Quanlity:Steady infrared heating system blowing and highly precise blow-mould closing system ensure quality.
4).High Speed
5).No Contamination:Closed production zone, good self-lubrication system avoid contamination.
6).Low Cost:Low consumption of electricity, air and water.
7).Low noise. B. The main components of the machine.
 

electronic parts
Name	Trader
Micro computer control system	Japanese MITSUBISHI
Temperature Controller	TAIWAN YANHUA  PID
Auxiliary Relay	OMRON
contactor	Schneider from France
Electric motor	Three phase 220V or 380V
Power Source	TAIWAN MEANWELL
Transducer	TAIDA FROM CHINA
hydraulic parts
Name	Trader
Oil pump	TAIWAN HIGH-TECH
Valve	JAPAN YUKEN
Oil pump and connection	JAPAN YUKEN
Sealed part	HALLITE
air control system
Name	Trader
Cylinder	AIRTAC
Air Valve	FESTO

     
C.Machine Features:
1. Stable performance with advanced PLC. 2. Conveying preforms automatically with conveyor.
3. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater. .4. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
5. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
6. No contamination and low noise with the air cylinder to drive the action instead of the oil pump. 7. 4 gallon bucket 20L HDPE/PP making machine  have  the only stable program 
8. Strong clamping force with high pressure and double crank links to lock the mold. 9. Two ways of operating: automatic and manual.
10. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
11. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
12. Contamination is avoided for the bottle body.
13. Ideal effect of the chilling with the chilling system.
14. Easy installation and starting
15.  Fully automatic process with low power consumption, high efficiency, quick and safe operation, easy for maintenance.
16. Most components of blow molding machine for edible oil bottle  are from famous world brand.  Configuration: 1 Hydraulic system: YUKEN valves; proportional pressure control 2Electrical system: PLC/CPU Simens 3 Clamping unit: bi-directional synchronous structure to calmp the mold 4Die: 38Cr MoAlA runner parts 5 hard surface alloy-steel gearbox 6Pneumatic parts: German Festo valves 7German Festo stockless cylinder manipulator     4 gallon bucket 20L HDPE/PP making machine

SOECIFICTIONS
Number of die	Set	1
MAX container capacity	L	25
Machine Dimension(LxWxH)	m	5.6x5.3x4.4
Total weight	Ton	16
CLAMPING
Clamping force	KN	200
Platen opening stork	mm	400~1000
Platen size(WxH)	mm	550x630
Mould thickness	mm	400~550
EXTRUDER UNIT
Screw diameter	mm	100
Screw L/ D ratio	L/D	24
Plasticising capacity(HDPE)	kg/h	230
Number of heating zone	zone	4
Screw heating power	Kw	16
Power of screw-bar machine	Kw	0.68
Extruder driving power	Kw	75
MACHINER HEAD
Number of heating zone	zone	3
Power of die heaing	Kw	14.7
Max die-pin diameter	mm	300
ENERGY-CONSUMPTION
General power of machine	Kw	140
Power of the electric motor of oil pump	Kw	30
Average energy consumption	Kw	100
Air pressure	Mpa	1
Operating pressure,(hydraulic)	Mpa	12~16