F8913 M2M Wireless Zigbee module Embedded Zigbee Module

Specifications 1.Indoor/Urban Range:60~90m

2.Embeded ZigBee chip

3.37.5x22.1x2.8 mm

4.data transmission

5.embeded zigbee module

F8913  M2M Wireless Zigbee module  Embedded Zigbee Module      F8913 ZigBee module is a kind of data terminal device that provides data transfer function by ZigBee network.   The product uses high performace industrial grade Zigbee solution ,support transparnt data transmission function,  low power consumption design, the lowest working current can less than 1uA; supply 5 I/O channels,  compatible 5 pulse wave output channels, 3 analog inputs and 2 pulse input counters.   It has been widely used on M2M fields, such as intelligent transportation, smart grid, industrial automation,  telemetry, finance, POS, water supply, environment protection, post, weather, and so on.       Specifications  

ZigBee Specification
ZigBee Chip	Industrial ZigBee Chip
Standard and Band	IEEE 802.15.4ISM 2.4 GHz
Indoor/Urban Range	30m90m(With PA)
Outdoor/RF Line-of-Sight Range	500m1200m(With PA)
Transmit Power	2.82 mw (+4.5dBm)100 mw (+20dBm) (With PA)
Bandwidth	250Kbps
Receiver Sensitivity	-95dBm-104dBm (With PA)
Network Topologies	Point-to-Point, Point-to-Multipoint, Peer-to-Peer and Mesh
Number of channels	16 Direct Sequence Channels
Channels	11 to 26
Max packge size	512Bytes
Interface Type
Serial	Data bits: 8   Stop bits: 1     Parity:none Baud rate: 9600, 19200, 38400, 57600, 115200 bps
Antenna	Standard SMA female interface, 50 ohm, lighting protection(optional)
Power Input
Standard Power	DC 3.3V/0.5A
Power Range	DC2.0~3.6V
Physical Characteristics
Dimensions	37.5x22.1x2.8 mm
Weight	5g
Environmental Limits
Operating Temperature	-25~+65ºC(-13~+149 ºF)
Extended Operating Temperature	-30~+75ºC(-22~+167ºF)
Storage Temperature	-40~+85ºC(-40~+185ºF)
Operating Humidity	95% ( unfreezing)

     Features and benefits    Design for Industrial Application u High-powered industrial ZigBee chip u Low power consumption design, support multi-sleep and trigger modes to reduce the power dissipation farthest u Support UART and optional SPI interface u Power range: DC 2.0~3.6V   Stability and Reliability u Support hardware and software WDT u Support auto recovery mechanism, including online detect, auto redial when offline to make it always online     High-performance   u Support ZigBee wireless data transmission   u Support repeater and end-device function   u Support Point-to-Point, Point-to-Multipoint, Peer-to-Peer and Mesh network   u Support 65000 nodes   u Support center node, route node and terminal node   u Support broadcast and target address transfer   u Wide communication range    u Supply 5 I/O channels, compatible 5 pulse wave output channels, 3 analog inputs and 2 pulse input counters .     Standard and Convenience   u Adopt a miniature package, support 2.0mm spacing stamp hole for SMT and 2.0mm spacing through-hole pins simultaneous   u Support intellectual mode, enter into communication state automatically when powered, support several work modes.   u Convenient configuration and maintenance interface   u Support for serial software upgrades and remote maintenance