Exit Push Button for Access

Exit Push Button for Access

Parameters:
Net weight of production: 18g ± 5%
Color: White

Working environment: 0~50° C\20~90%(no condensation, no ice over)

Storage environment: -20~60° C\20~90% (no condensation, no ice over)

Working status: Normally open, The user connect wire between normally-open port (N. O) and public port which are subject to the door-holder. The door-holder are always open, and the circuit lies in the on-state after press the door-holder; Normally closed: The user connect wire between normally-closed port (N. O) and public port which are subject to the door-holder. The door-holder are always closed, the circuit lies in a disconnected state after press the door-holder;
Administer standard: No

Special parameter:
Life span: Above 100000
Operation place: Indoor
Withstand Voltage: 250VDC
Maximum working current: Direct Current 3A
Composition: High hardness plastic
Working mode: Key-press comportment

Installation:
Taking down the fixed plastic shell and panel shell from the buckling position, then use the self-providing self tapping screw fix it on designated position.
According to the manner as required (normally open or normally closed), connect the wire with the joint of panel shell after take holding of the wire protruded from the fixed plastic shell.
That are OK after put the panel shell on the fixed plastic shell

Notes:
1. The position of the connection about which should be normally open or normally closed must be correct.
2. The wiring must be fixed firmly, or there will appear invalid keys after use a long time.