1 / 1
Model No. : | CP-2000S |
---|---|
Brand Name : | Canpure |
Product description
♦ No salt needed Canpure EDI does not consumesalts in operation and need much lower operating expenses. So Canpure EDI does not need recycle the concentrate,which makes the system much simpler. EDI without salt, reduce the operating cost.
|
♦ Counter flow Concentrate and electrolyte stream flowing into EDI in opposite directions can avoid fouling largely. Then it broadens the feed water limit adequately.
|
♦ Low energy consumption
|
♦ High quality material and components
|
♦ Simple arrangement, installation, operation and electricity safety. Installation and maintenance easy operation. Easier to array moudles side-by-side on a kid. The power connector of Canpure EDI is waterproof.
|
Canpure EDI modules can be used to produce ultrapure water. It can be used in the field such as microelectronic and semiconductor production, pharmaceutical and biomedical industries, chemical production and high pressure boliler such as the ones in power plants.
|
Configuration | Plate-frame |
Filling form | Resin all-filled in three chamber |
Number of inlet and outlet | Three-in and three-out |
Flow Direction | Counter flow |
Sheathing Material | Aluminum plate |
TEA | Maximun 35 ppm |
Applied Feed Pressure | Maximum 0.4 Mpa ( 60 psi ) |
Product TMP* | 0.15±0.02 Mpa ( 22±3 psi ) |
Concentrate TMP* | 0.1±0.02 Mpa ( 15±3 psi ) |
Hardness ( as CaCO3 ) | Maximum<10 ppm. Recommend<5.0 ppm |
Organics ( as TOC ) | Maximum 0.5 ppm TOC. Recommend<0.1 ppm |
Oxidizers ( Cl2 / O2 ) | Maximum 0.05 ppm / 0.02 ppm. Recommend Not Detectable |
Metals ( Fe,Mn,etc. ) | Maximum 0.05 ppm |
Silica | Maximum 0.5 ppm |
Total CO2 | Recommend<10 ppm |
Particulate matter | SDI<1.0 |
Conductivity | Maximum 60 µs/cm ( as NaCl ) |
Operating Temperature | 5~35 °c ( 41~95 °F ) |
Operating PH range | 6.0~9.0 |
Illustrate: * means the value is measured as the flow standard. |
♦ Intuitive digital display EDI need DC electric field to promote the directional migration of charged ions, using ion-exchange mebrane separating the role of output of water. The DC current reflects the size of ion migration. Stable current can from a stable ion mobility, therefore, the stable DC current is the power supply primary key function.
|
♦ High frequency and high effciency, high PF(power factor),high reliability.
|
♦ Low ripple,low power consumption, low nosie and small volume.
|
♦ Power supply mode mode for one to one.
|
Send your inquiry to this supplier