Economical used rotary sand dryer / sand dryer price / sand drying machine

 Low consumption  Resasonable price   Low noise drive gear  Suitable for many fields.     Economical used rotary sand dryer / sand dryer price / sand drying machine       The economical used rotary sand dryer can dry many kind of materials which contain moisture, The sand drying machine is applicable for particle materials, and is also applicable for paste and viscous materials which are mingled with particle materials, or materials whose water content is high.  such as coal, sludge, coal slurry, brown coal, fly ash, gypsum, clay, Kaolin, grain (corn, wheat), mineral powder, slag, iron powder, mill scale, sawdust/woodchips, chicken manure, feed etc, The rotary  dryer can be widely used in building materials, metallurgy, cement and mining industry.            The economical used rotary sand dryer mainly consists of drum barrel, roll ring, wheel gear, lifting board, chain, reduction gears, and motor etc parts. It is matched with conveyor, dust remover and draught fan etc equipments. The sand drying machine has the advantages of reasonable structure, excellent manufacture, high output, low energy consumption, convenient operation and so on.    

Model (mm)	Gradient (°)	Speed (r/min)	Power (KW)	Capacity (t/h)	Weight (t)
ZKRDΦ600×6000	3-5	3-8	3	0.5-1.5	2.9
ZKRDΦ800×8000	3-5	3-8	4	0.8-2.0	3.5
ZKRDΦ800×10000	3-5	3-8	4	0.8-2.5	5.6
ZKRDΦ1000×10000	3-5	3-8	5.5	1.0-3.5	6.7
ZKRDΦ1200×10000	3-5	3-8	7.5	1.8-5	14.5
ZKRDΦ1200×12000	3-5	3-8	11	2-6	14.8
ZKRDΦ1500×12000	3-5	2-6	15	3.5-9	17.8
ZKRDΦ1800×12000	3-5	2-6	18.5	5-12	25
ZKRDΦ1800×14000	3-5	2-6	18.5	5-15	27
ZKRDΦ1800×20000	3-5	2-6	22	8-20	30
ZKRDΦ2000×18000	3-5	2-6	30	8-23	45
ZKRDΦ2200×18000	3-5	1.5-6	37	10-25	48
ZKRDΦ2200×20000	3-5	1.5-6	37	12-28	56
ZKRDΦ2400×20000	3-5	1.5-5	45	18-30	60
ZKRDΦ2800×2000	3-5	1.5-5	55	20-35	68
ZKRDΦ3000×20000	3-5	1.5-5	55	25-40	78
ZKRDΦ3000×25000	3-5	1.5-5	75	30-45	104.9

      The wet materials are transported into the material hopper by the belt conveyor and bucket elevator, and gets into the feeding terminal through feeding pipe with the aid of feeder of material hopper. The pitch of the feeding pipe should be more than the natural pitch of materials in order to help the materials flow into the dryer successfully. The cylinder of dryer is a rotary cylinder which is oblique slightly. The materials are fed from the relatively higher terminal, heat carrier comes in from the lower terminal, and sometimes the heat carrier and materials get into the cylinder together. Along with the revolving of cylinder, the materials move to the lower terminal due to the gravity. When the wet materials move forward, it receives the heat from the heat carrier directly or indirectly. As a result, the wet materials are dried, and discharged out by belt conveyor or screw conveyor on the outlet. There is shoveling plate inside the cylinder in order to shovel materials up and cast it out, to increase the connection surface, to promote drying efficiency, and accelerate the forward movement of materials. Generally, the heat carrier can be hot air and chimney flue. After the heat carrier is dried, the materials mingled with air should be collected with cyclone dust collector. If there is need to reduce the content of dust mixed with tail gas, the heat carrier should be subject to bag dust collector or wet dust collector before it is discharged.         Shanghai Yuke Industrial Co.,Ltd is a trustworthy and specialist designer and manufacture of briquetting machine,briquetting press,industrial dryer,etc.We can offer the optimal briquetting and drying solutions for processing industrial wastes.The industrial wastes and dust processed by our machines are convenient for recycling and transporting,thus improving wastes utilization ratio and enabling you to make full and effective use of resources.YUKE briquetting equipment and dryers are extensively used ini all kinds of industrial enterprises.                   1. What's your raw material? 2. What's the size of your raw material? 3. What's the capacity of the machine do you need? 4.. Do you need the single machine or the complete line?       Many thanks for your trust, we can provide your operator training according to your demands and the conditions of applied spot, we can help you choose the right equipments.