E212-159 Replacement for ARGO Filter Element E212-156

HQ25.02Z power plant oil motive filter element
High pressure oil motor filter HQ25.03Z
Circulating pump inlet filter HQ25.200.11Z
Replacement for PALL Filters HC8314FCN16Z
Replacement for PALL Filters HC8314FCP16H
Replacement for HYDAC Filters 0660R050W/HC
Replacement for HYDAC Filters 2600R050W/HC
HC2296FKP18H50 Replacement for PALL Filters
Replacement for Leemin Filters LH850R010BN/HC
Replacement for Leemin Suction filter element LH1300R010BN/HC
Duplex Filter element KF-25A*120D

Gas Turbine Filter Element DP1A601EA03V/-W

Gas Turbine Hydraulic Filter Element DP6SH201EA01V/-F
Hydraulic Return Oil Filter DP1A401EA01V/-F
DP301EA01V/-W Gas Turbine Filter Element
Gas Turbine Hydraulic Filter Element DP2B01EA10V/-W
Return Line Filter Element DR405EA03V/-W
EH Oil Filter Element DP6SH201EA10V/-W
Gas Turbine Filter Element DP602EA03V/-W
Replacement for Leemin Filters LH1300R003BN/HC
Replacement for Leemin Filters LH1300R005BN/HC
Replacement for Leemin Filters LH1300R010BN/HC
Replacement for HYDAC Filters 1300R050W

Replacement for Leemin Filters LH0850R010BN/HC

Replacement for Leemin Filters LH850R010BN/HC
Replacement for Leemin Filters LH850R025W
Replacement for Leemin Filters LH1300R025W
Replacement for Leemin Filters LH330R25W/HC

Replacement for HYDAC Filters 0660R050W/HC

The filter is directly installed on the oil tank cover, the filter head of the filter is exposed outside the oil tank, the oil return cylinder is immersed in the oil tank, and the oil inlet is equipped with a pipe and flange connection, which simplifies the system pipeline and makes the system layout More compact, easier to install and connect.
Set up filter element pollution indicator and oil circuit bypass valve to improve the reliability of hydraulic system:
When the filter element is blocked by contaminants or the system liquid temperature is too low, flow pulsation and other factors cause the inlet oil pressure to be 0.35MPa, the signalling device will issue a signal indication. The filter element should be replaced in time or the oil temperature should be increased. In this case, if the machine cannot be stopped immediately to deal with these faults, the bypass valve located at the lower part of the filter element will automatically open (the opening pressure of the bypass valve is 0.4MPa) to protect the filter and the hydraulic system from working normally.
The design adopts direct return to filter oil, which makes it very convenient to replace the filter element or refuel the fuel tank