dust collector cyclone / dust collector bags / dust collector

Specifications Bag Dust Collector :

1.Full automation;

2.High-efficiency;

3.Easy maintenance.

 Pulse Bag Dust Collector/ Bag Filter/ Bag Dust Collector       Product Description The introduction of dust collector: PPC dust collector makes the compressed air as driving force for cleaning air, uses pulse injection organization releases the compressed air instantly and induces the severalfold secondary air into the filter bag at high speed to make the bags expand rapidly so as to impact,shake and reverse flow to clean the dust.
The dust collector are a series of products with the filter bag for a set number 12, mainly in 24 bags, 36 bags, 48 bags, 60 bags, 72 bags, 84 bags, 96 bags, 112 bags, 120 bags. Bag Filters use the well proven air pulse jet cleaning system . The Filter casing has tubular filter sleeves, supported on wire cage. Dirty gas is  cleaned by dust particles clinging / stopping on the filter media surface. Clean gas flows on through the filter sleeve and out from the top of filter  mounting tube sheet . These Bag filters when used can arrest particles down to 1 micron in size with fairly good collection efficiency .
The Tubular Filter Sleeves are neatly grouped in row of multiple elements. While the filters remain on service , through an auto time sequencing  system they are back washed by a strong pulse of compressed air which shakes loose the accumulated dirt particles. The dust falls to the  collection hopper and is out through Air Lock Valve.  We also supply special Bag Filters to handle potentially explosive materials by incorporating Explosion relief valves and using special Anti-Static  Filter Media and mounting accessories . For continuous duty only compressed Air / Gas is required besides few Watts control power.          
The features of dust collector: 1) High Purification efficiency, ability to handle large gas; 2) Stable performance,long service life; 3) Convenient operation and maintenance; 4) Suitable for dust removing of a variety of multiple points of dust producing. Structure of dust collector: Dust catcher is made of five parts: the upper, middle, lower box, ash systems, and blowing system, blowing system include control instrument, solenoid valve, blowpipe, and gas bge .Box include inlet and outlet box, perforated plate, filter material, dragon skeleton and Venturi tube . Details please refer to the operating instruction manual.       Operating principle of dust collector: Dusty gas from the air inlet of dust collector into the middle and lower box, through the bag filter's effect, separate the dust from gas, dust was adsorbed on the surface of dust bag, clean air is discharged to the outlet through filter bags, dust attached to the surface of the filter bag grows thicker as time goes by. According to the setting of injection procedure, pulse injection valve receives the order issued by the controller, trigger to open in order, the compressed air in the gas bag spray out from each hole of injection tube and jet into each corresponding filter bag via venturi, the dust attached to the surface of filter bags fall off into the ash hopper and expel from ash valve.   The Main Technical Parameters of  dust collector:  

Model	Air flow rate	Total filter area	Chamber qty	Quantity of filter bag	Pulse Valve		Compressed air consumption	Weight (without insulating layer)
					Quantity	Spec.
	(m³/h)	(m2)	(pcs)	(pcs)	(pcs)	(inch)	(N m³/min)	(kg)
PPC32-4	8930	124	4		4		0.37	3400
PPC32-6	13390	186	6		6		0.55	5400
PPC64-4	17800	248	4	64	4	2 ½	1.2	6900
PPC64-6	26700	372	6		6		1.8	9700
PPC64-8	35700	496	8		8		2.4	12500
PPC96-4	26800	372	4	96	4	3	1.2	8710
PPC96-6	40100	557	6		6		1.8	12400
PPC96-8	53510	744	8		8		2.4	15700
PPC96-12	80400	1023	12		12		3.4	25200
PPC128-6	67400	936	6	128	12		3.5	20100
PPC128-8	89870	1248	8		16		4.8
PPC128-10	112100	1558	10		20		6.0	28900
PPC128-16	179700	2496	16		32		9.5	50000
PPC128-20	224600	3120	20		40		12	60000

                Cyclone Dust Collector: