DUOLING CONE CRUSHER USED IN CRUSHING MINING SERVICES FOR SALE
General Introduction This series cone crusher is developed with a unique patented design-eccentric bushing moving around a stationery shaft.The reinforced main shaft is suitable extra heavy duty crushing condition. Meanwhile, the crushing chamber specially designed according to particles sink principal and its matching speed can sharply increase the crushing ratio, output and content percentage of cubical product in final crushed material. The series crusher is regarded as new generation for replacement of the traditional spring cone crusher in modern mining industry. The PYH series cone crushers are characterized by the optimized combination of crusher speed, eccentricity, and cavity profile. This combination has proved revolutionary, providing higher capacity, better product quality and suitability to a wider range of applications. From limestone to compact hematite, from ballast to manufactured sand production, and from small portable plants to large mining plants, the PYH cone crushers are unbeatable in secondary, tertiary and quaternary applications. The PYH cone crusher cavity can be converted from extra-fine to extra-coarse cavity simply by replacing the mantle, bowl liner, adapter ring, and wedge bolts. In this way, the crusher is easily adapted to feed and desired product requirements. Using the hydraulic motor setting adjustment makes it easy to balance the crushing circuit and optimize crusher productivity. The addition of a hydraulic motor position transducer system to keep track of crusher setting is all that is required to connect the crusher to an electronic automation system.
PYM and PYH series in terms of its internal structure are the same, but in general,the former is the latter's heavy version, compared with the general hydraulic cone crusher has the following advantages:This series cone crusher is adopted with a unique patented design-eccentric bushing moving around a stationery shaft.The reinforced main shaft is suitable extra heavy duty crushing condition. Meanwhile, the crushing chamber specially designed according to particles sink principal and its matching speed can sharply increase the crushing ratio, output and content percentage of cubical product in final crushed material. The series crusher is regarded as new generation for replacement of the traditional spring cone crusher in modern mining industry. Application Secondary and Tertiary Crushing Mining, Aggregate, Metallurgy, Industrial, Construction, Environmental Working Principle Crushing process is completed between the fixed cone and eccentric rotating moving cone.Horizontal axis of crusher is driven by motor through the V-belt,and drives eccentric cover by gear.Eccentric cover makes main shaft rotate to cause eccentricity.Materials enter crushing chamber through upper inlet of crusher,and are discharged out through lower outlet.The series of Single Cylinder Hydraulic Cone Crusher has much less trouble,and operating ratio is increased more than 85%,so the whole cost is reduced greatly.
Technical Parameters
Model | Cavity | Discharge Setting Min (mm) | Feed Opening (mm) | Power (kW) | Weight (t) |
PYH-2 | X | 13 | 95 | 160 | 11.4 |
Z | 16 | 120 |
C | 19 | 190 |
PYHD-2 | Z | 6 | 54 |
C | 10 | 76 |
PYH-3 | X | 13 | 105 | 220 | 17.4 |
Z | 16 | 150 |
C | 19 | 215 |
CC | 25 | 230 |
PYHD-3 | X | 6 | 25 |
Z | 8 | 54 |
C | 10 | 76 |
PYH-4 | X | 13 | 110 | 315 | 24.5 |
Z | 20 | 200 |
C | 25 | 250 |
CC | 30 | 300 |
PYHD-4 | X | 6 | 40 |
Z | 8 | 50 |
C | 10 | 90 |
PYH-5 | X | 16 | 135 | 400 | 34.4 |
Z | 22 | 210 |
C | 30 | 290 |
CC | 38 | 330 |
PYHD-5 | X | 8 | 40 |
Z | 10 | 56 |
C | 13 | 95 |
PYH-8 | X | 16 | 220 | 630 | 63 |
Z | 25 | 265 |
C | 30 | 300 |
CC | 33 | 350 |
PYHD-8 | X | 5 | 35 |
Z | 10 | 90 |
C | 13 | 155 |
Crusher Models and Capacities (t/h) at Close Side Setting |
Model | Close Side Setting (mm) |
| 6 | 8 | 10 | 13 | 16 | 19 | 22 | 25 | 32 | 38 | 45 | 51 |
PYH-2 | 55-75 | 60-90 | 80-115 | 110-145 | 130-170 | 140-180 | 150-190 | 160-210 | 180-230 | 200-245 | | |
PYH-3 | 80-95 | 100-130 | 110-140 | 145-185 | 175-220 | 190-240 | 200-260 | 220-280 | 240-320 | 290-380 | 340-440 | |
PYH-4 | | 115-150 | 130-175 | 180-230 | 220-280 | 240-320 | 260-340 | 280-370 | 310-430 | 350-490 | 400-550 | 450-620 |
PYH-5 | | 140-170 | 170-220 | 225-290 | 270-350 | 310-400 | 335-430 | 355-450 | 395-530 | 435-600 | 500-680 | 560-760 |
PYH-8 | | | 235-330 | 300-420 | 370-500 | 420-540 | 450-590 | 480-710 | 530-780 | 580-920 | 560-1000 | 750-1150 |