Dual Output 10.2KW Solar Inverter

Inverter Use Noted:

1. The starting power of inductive load electrical appliances shall beat least three times of the rated power of the electrical appliances.lf the starting power exceeds the inverter power, the inverter may bedamaged. Please select a suitable model before purchasing.
2. Please connect the circuit correctly according to the instructions,and install switches for each circuit.
3. Starting sequence: first turn on the battery switch, start the inverter,and turn on the PV, mains and load switches.
4. Shutdown sequence: turn off the switches of load, PV and mains, turnoff the inverter, and finally turn off the battery.

Tips
- There is only one MPPT, and the dual PV input is to facilitate solar panel wiring and reduce the use of combiner box.
- The benefits of comparing dual MPPT: single entry, good consistency of machine control.
- The secondary output in the dual output is for emergency use, the power is only one-third of the main output, when there is no PV utility input, and the battery voltage is too low, only when the secondary output will be used, under normal circumstances do not need to connect.
-There is a detailed tutorial on the product manual, or you can contact us.

Features:

◆ Pure Sine Wave Inverter(on/off Gird)

◆ Self-consumption and feed-in to the grid

◆ Inverter running without battery

◆ One-click restoration to factory Settings

◆ Bulit-in Lithium battery automatic activation

◆ Bulit-in 160A(for 7.2KW/8.2KW)/180A(for 10.2KW)MPPT solar charger

◆ High PV input voltage rang(90~500VDC)

◆ Bulit-in anti-dusk kit for harsh environment

◆ Communicate with WIFI for IOS and Android

◆ Dual PV Input and output

◆ Touch buttom

Advantage：

1. PV dual input, AC dual output;

2. Dual PV input: facilitate the connection of solar panel and reduce the use of combiner box;

3. AC dual output: under normal conditions, the main circuit and secondary circuit outputs are used normally. When there is no PV and mains power input and the battery voltage is too low, the main circuit is disconnected and only the secondary circuit output is retained to save power.